Jump to content

aPlunderer v2 [Pyramid Plunder] [ABC2]

Recommended Posts

Please remember to toggle roofs off in Runescape settings.

Auto-retaliate should also be disabled to avoid some issues.

You can find and buy this script from the store:

- 21 thieving level
- You have to have started Itchlarin's little helper (up to the point where you can access Sophanem)
  > Contact! quest is only required if you want to bank in Sophanem (bank is very close to the pyramid).



- Supports all rooms

- Remembers where the correct entrance to the pyramid is until it changes.

- Detects when a player find the correct tomb door to the next room and uses that door when it's time to go there.

- Drinks antipoison when poisoned.
  > Antidote++, super antipoison and normal antipoison (select in GUI)

- Eats food
  > Select preset ID, write custom ID or use automatic detection. Special foods like cake etc. might require a preset. Presets for cake and saradomin brew are already added.

- Banks in Nardah or Sophanem when low on food. Also option to bank in Castle Wars with ROD.
  > Will withdraw antipoison in doses of 4, but if those are unavailable then it will withdraw them with doses of 3.
  > You can choose to withdraw things like lockpicks, stamina potions, waterskin.

- Automatically progresses through the rooms while leveling up (from 21 to 91)
  > Only if you select the automatic room selection

- Can loot chests and sarcophagi if you want.

  > Enable "Use sceptre teleport" to use it to go inside pyramid. You can choose to only use it when coming back from bank or always to skip finding correct door.
  > Enable ROD + Sceptre banking method if you want it to go to castle wars bank when it's time to bank.

- You can choose to check for snakes before looting the urns, but this is not recommended since it lowers you xp/hr. Only saves food if you care about that.

- Support for breaking. Waits until you are out of pyramid to take a break.

- "last" argument to use the last saved settings.

- Has customization options for walking, urn order, spam clicking.


Are you having problems with the script?


Easy way to solve most issues with tribot is to use the following tool: (this will delete hooks.dat, jagex cache, lg client related cache etc. for you)
Make sure you close all tribot clients and runescape clients before you use it so it works properly!

You can also try the following:

- Make sure your roofs are toggled off in Runescape settings.

- Simply restarting your Tribot client can sometimes help too. Also restart your Looking Glass client if you are using Looking Glass. Close all windows of Tribot and then restart it. It's recommended to restart a few times to make sure all hooks get updated, especially after Runescape has updated. Let Runescape load after each restart.

- If you are using Looking Glass with a client that has plugins, please try disabling plugins since some of those could interfere with Tribot's functionality.
You can do the following all in one before restarting your client:

- Try clicking on File ---> Delete Cached Files and restart your Tribot client.

- Try going to litemode in Tribot's settings and restart your Tribot client.

- Disable "Use Hook Storage" setting in Tribot settings.

- Some people have also reported that deleting Jagex Cache manually can fix some issues. Here are steps to delete it: https://support.runescape.com/hc/en-gb/articles/360001441169-How-to-clear-your-cache-


if all else fails, please post a proper bug report:
- Describe the issue properly

- Go to Tools -> Generate Bug Report in your tribot client. Do this when the issue is happening or right after the issue happened to provide the most useful bug report file. Send this .zip file to me.
> You can now send the .zip file directly to me by pressing the "Send to scripter" button. Please send me a message after doing this. This button will only appear when the script is running. Make sure to press this button when the issue is happening or right after. If you are unable to press it when the issue is happening or right after, you can still use it to send me your script settings.


Settings information and help:


How to set up custom urn orders:


Custom urn order maps: https://imgur.com/a/4lEq0Ho (if you want to set up custom urns orders)

Simply tick the box next to the urn order information to enable it and then write the orders you want to use. You can use as many orders as you want and the script will randomize between those orders. Example: ABCDEFGHIJKLM, ABCEDGFHIJKLM

You can also choose how the script randomizes them:
- Use profile randomization: it will use profile based randomization so that it will randomize them slightly differently for each account.
- Use prioritization: it will most of the time pick the first orders you added
- Use full randomization: will pick the order completely randomly

Custom urn order now support custom orders to loot chest and sarc in rooms that you are looting urns in. Put X for chest and Y for sarcophagus in the order to make it loot it at that position of the order.

How to record custom walking paths:


1. Click on start path to start recording a path. Make sure you start it at the correct location. It will say in the debug if you are at the wrong location.
2. When you have clicked on start path, you should start walking like you normally do to the correct location. It will paint all the tiles you record in the minimap.
3. When you are done with the path and walked to the correct location, just press end path and it will end the path.

It's recommended to records as many paths as possible. For the same path. Script will randomly pick a path and slightly randomize the paths themselves.

Best way to contact me is to send me a private message in the Tribot forums.

"last" = will load your last used settings and skips gui
"profilename" = will load the settings from profile with that name and skips gui

Edited by Aropupu
  • Like 4
  • Sad 1
Link to post
Share on other sites
  • Replies 1.1k
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Popular Posts

Please remember to toggle roofs off in Runescape settings. Auto-retaliate should also be disabled to avoid some issues. You can find and buy this script from the store: https://tribot.org/co

please update script. it doesnt work properly runs random urns not straight checking. if fails check urn it goes to another random urn and so on... please fix it

No. Could maybe add support for it. Anyone else who wants this feature to be added?

broken, i set it to floors 1-2 just chest and sarcofigus and plunder 3 and 4. i started it with the invent ready set it all up and with check snakes and it runs inside starts the thing and then just stands there... no error logged in client debug


Either you are doing something wrong or the checking for snakes is broken. I'll check it out.

Please make sure to read the instructions properly and try it without checking for snakes enabled. I'll try to fix it ASAP. Just tell me if it works without checking for snakes.

Also, if the script doesn't work at all, please make sure to restart Tribot completely...

Edited by Aropupu
Link to post
Share on other sites

Checking for snakes works just fine for me at least.

I forgot one thing from the sarcophagus looter so it only looted one sarcophagus and then didn't loot them anymore. It will be fixed in the next update.

i took the thing off and its still not working. wont bank propperly just stands there i stand it at the bank n its withdrawing the wrong amount of potions and food then runs past the first trap n stops

Link to post
Share on other sites

i took the thing off and its still not working. wont bank propperly just stands there i stand it at the bank n its withdrawing the wrong amount of potions and food then runs past the first trap n stops


Everything works just fine for me, which suggests to me something is wrong on your end. You should restart Tribot completely and you could even try reinstalling it. If you can't get it to work, then I can refund you because you just bought it. All I can say is that your problems aren't caused by the script.


I can't fix something that isn't broken.

Edited by Aropupu
Link to post
Share on other sites

i re installed tribot and that fixed it, its going fine now thanks mate


Good to know.

I fixed the sarcophagus looting and made some improvements to checking for snakes, because it was a bit slow when I tested it. 

The update is waiting for approval tho, so the script is not yet updated at least. Hopefully the update will go through soon.


Sometimes repository seems to update the scripts instantly and sometimes it takes forever.

Edited by Aropupu
  • Like 1
Link to post
Share on other sites

does anyone know the sceptre drop rate? Like per day ect?

Will look into purchasing this within the week.

also if intending to keep artifacts found would it be possible for you to make a script/feature that sells them to simon templeton? the npc gives money for them and it can really add up, hes right by the agility pyramid

Edited by Bonesaw
Link to post
Share on other sites

hey mate its doing it again. ill be online later aswell so maybe u could go on skype ill share my screen and you can tell me the problem? cheers

Yeah, just contact me in Skype.


does anyone know the sceptre drop rate? Like per day ect?

Will look into purchasing this within the week.

also if intending to keep artifacts found would it be possible for you to make a script/feature that sells them to simon templeton? the npc gives money for them and it can really add up, hes right by the agility pyramid

I have no idea about the drop rate, but I have only got 2 sceptres from 21 to 92. I didn't loot all the chests all the time tho.


Yeah I can probably add a feature to sell the artifacts.

Link to post
Share on other sites

leaves the pyramid mid run when not short on food/antis/space


This is basically caused by a Tribot method being broken after the runescape update. Inventory.getCount will, in certain conditions, return 0 even tho it shouldn't. 


I made an additional check for it in the newest update that will hopefully get approved in the repository soon. Updated.

Edited by Aropupu
Link to post
Share on other sites
  • 3 weeks later...
  • 2 weeks later...

Can i buy this script from you with 07gp? And if so, how much will it cost? Thanks


You can only buy this script with credits in the repository.


You can buy credits from other users with 07gp here:


Edited by Aropupu
Link to post
Share on other sites
  • Aropupu changed the title to aPlunderer v2 [Pyramid Plunder] [ABC2]

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Content

    • By Laniax
      Track your bots remotely in real-time, monitor chat, inventory, equipment, break & runtime, hitpoints, position and much more!
      All for free, check out the 'Script settings' tab in the GUI.

      Need help?
      Add me on Discord (fastest response): Laniax#2381
      Or PM me the forums
    • By ScriptsForMains
      Start the script in the area you want to gather resources. Follow the prompts in the pop-up boxes and type exactly what's needed (pay attention to caps!!).  Uses ABC2 timing and custom antiban.  Lots of safety features (will log out if unsuccessful at banking, if experience hasn't been gained, if it can't click on its target, etc etc).  

      Supports mining, woodcutting, fishing, thieving (with coin pouches!!), and some hunter animals (can't remember which ones, it's been forever since I've used it for hunter :P).  I recommend using low ABC2 reductions for slower things (fishing or high level resources) and higher ABC2 reductions for stuff like power mining.  For slower things, this will make you move the mouse a lot less when waiting for your character to stop doing something and is much more realistic.  For faster things, you'll be standing around a lot less and getting more exp.  

      Uses Daxwalker to bank...  Right now I'm just using public keys so if it's not working it's likely because Daxwalker is busy.  
      It can also power level.  Just tell it what to drop!!

      Used this to get my stats up to Drag slayer 2 requirements...  Simple program but very effective.  


      If you run into any problems with the default file, delete it (it's in the AppData -> Roaming -> .tribot folder) 
    • By justhin
      Justhin's Zeah Thiever
      Gets your account ready to farm 
      This script helps you to get your thieving level ready.
      It'll walk to the Baker's Stall in Zeah -> Level up -> Walks to Fruit stall -> Levels till you stop it.
      This requires level 5 Thieving and 15% Hosidius favor.
      Use ClientOfKourend made by @FALSkills you can find it here https://tribot.org/repository/script/id/2569-clientofkourend/
      Follow up by using the EXP lamps on the Thieving skill and the scroll for 15% Hosidius favor.
      Instructions - Stand anywhere in Zeah, make sure you got 15% Hosidius favor and at least level 5 Thieving.

       Start the script once you're in position and you've followed the above steps 
      Repository - https://tribot.org/repository/script/id/3205
       Source code- https://pastebin.com/YP8jtzrc

      Important - The script will improve over time.
      To-do - Add multiple Fruit stalls,  Implement small breaks
      To-do - Improving antiban, yes, there is antiban Hower, it can be improved.
      Some extra info
      It has some basic logic to flee if it's being attacked, eat on damage, prevents stealing if you get caught and world hopping once the dogs are no longer lured inside the house.
      It'll generate a Random seed based on your OSRS account, I'm using this to modify delays.
      Personal signature

      Will now detect multiple players and choose the right thieving spot/hop based on players nearby.
      Added multiple Fruit Stall support
    • Guest
      By Guest
      Hey everyone, I'm in search of a private OSRS Thieving script. Judging by reviews It seems the typical (Thieving) script gets more lash than positive feedback (EX: Script not eating, Missclicks, Banking, Blackjacking. just to name a few that I see frequently) Thus being said I realize the complicity and precison that must go into such a script and that is why I am calling for the top Private Script Writer(s). Im I firm believer that you get what you pay for that being said any Recommendations on who to contact in relation to who specailizes in making the "best" Private OSRS scripts would be greatly appreciated as I am new to Tribot and this is my first post. Thanks in advance!
      -main points: Blackjacking, Lure, Eating, Unote food. (would be nice to have other options other than blackjacking but not fully necessary)
    • By Leespiker
      Spiker Blackjacker
      Purchase Plans
      What's Blackjacking?
      Estimated XP Rates
      45-54 = 40k+
      55-64 = 60k+
      65+ = 80k+ (up to 260k)
      Built-in antiban + ABCL 10
      Knocks out and pickpockets bandits, bearded bandits, and menaphite thugs efficiently
      Lures mobs in and out of buildings when necessary
      Closes curtains to keep mobs in and out of buildings
      Eats when necessary
      Unnotes food fast using Banknote Exchange Merchant
      Buys jugs of wine from Ali The barman if not using noted food
      Switches to better mobs when needed
      Uses double double hit technique for max xp
      Up to 260k thieving xp/hr
      Up to 120k gp/hr
      45+ Thieving
      30+ hp (small chance of dying if lower)
      The Feud (quest)
      A blackjack equipped
      Noted food in first inventory slot and 5k+ starting gp (or coins for jugs of wine)
      Fill rest of inventory with unnoted food (or jugs of wine) on start
      Start in dye shop with one bandit or bearded bandit if thieving < 65 on start
      Start in tent southwest of camel shop with one menaphite thug if thieving >= 65 on start
      Progress Reports
      Without breaks
      With 1-3 hour breaks
      Please post your progress reports, bugs, and suggestions.
    • By xCode


      GUI & Paint [Contains Large .Gif]
      Update log


      Bug Report format

    • By unbrakeable6
      So i have 99 thieving and i am making money at master farmers, but there is small problem...
      With 99 thieving + silence gloves i dont fail at all at master farmers, and i really hate that ALL scripts are same.
      The point is, if i get stuff from random events, it doesnt bank them or drop them, so i always have to baby sit bot and drop them myself..Also scripts are wasting time on dropping junk seeds, so i dont mind if i get junk seeds, dont need to drop junk seeds if i already have seeds i want in my inventory, like, ranarr seeds, snapdragon seeds and others.. so i need script what just spam clicks on master farmer without dropping junk seeds or anything, and i dont need inventory for good seeds cuz they will stack..
      Sorry for my bad english lol. But can anyone add this feature to script? Using silence gloves and wont waste time on dropping junk seeds cuz i have mains seeds in inventory already and it doesnt need space for other seeds.
      So just add script what spam clicks on masterfarmer and uses silence gloves, so it will be good for people who have 99 thieving...
      I hope someone understand my english and can relate to this problem... Maybe someone can explain it better?  
    • By Flexx
      - Does Pyramid Plunder up to room 5.
      - Automatically recharges staff! Does not support the underground tunnel thing
      - 21 thieving
      - Pharaoh's sceptre with at least 1 charge (Make sure you have enough stone artifacts to recharge it if you are just starting it at 1 charge)
      - 15 Lifepoints at minimum recommended.
      - Lobsters and Antipoison (3)'s.
      - Make sure you have enough of both of these things in the bank
      Start the script with a Ring of Dueling equipped at Castle Wars or the pyramid.
      Source: https://github.com/Flexx/plunder
      Link: https://tribot.org/repository/index.php/script/id/664
      I wrote this privately for personal use - that's why there's a lack of GUI and options. If you'd like to see more, let me know.
    • By pkerman
      Silk Stealer 6000!   Looking for that script that will get you to level 53 thieving for DT? Look no further!         What does it do? This script will effortlessly steal from Silk Stall in Ardougne & then bank it all for you! ​ Ardougne Knights getting pesky? Not a problem, this script will make sure they stay out of your way by getting luring them away.​​​ Want to know your progress? PaintOnScreen will let you know the following: Your current level, levels gained, XP gained, XP till your next level, as well as how much XP you're getting per hour!   Where do I start it? I recommend starting at Ardounge's Market, but with the use of WebWalking, you can technically start this script from anywhere!  
        What levels do I need? Level 20 thieving? Then we'll steal silk to your heart's content! (As long as you heart's content with 53 thieving). Not level 20 yet? No Problem! This script will Home Tele to Lumbridge & pickpocket men until you are Level 20!  
      What's the XP/Profit like?
      You will on average earn about 9k XP an hour. Due to the silk respawn time this is pretty standard for everyone. Meaning you can achieve 53 thieving in less than 18 hours using this script from level 1! Profit is around: 28 silk every 5 mins  (1,680gp when sold back to Merchant) or 336 silk an hour (20,160gp when sold back to Merchant). You would have to steal 5.5k silk to achieve 53 thieving from 20, which adds up to 330k when sold back to Merchant!  
        Wow! Does it do anything else!? You bet'cha! Tons of silk banked from using this script? We can help! As long as you are level 53 thieving, this script will sell your silk back to Merchant for 60gp ea! Script will also print progress reports into the debug window of it's current status as well as how many silks you have either stolen ;] or sold!  
      *WARNING: If you've stolen from the Silk Merchant within 30 minutes - 1hr of trying to sell silk to him, he will recognize you & have guards attack you! The script will then have to run away and log out. So please play for at least an hour before attempting to sell silk.*
      Debug Reports:

      Post feedback if you'd like. Enjoy!
      Get This Script!
    • By Larry Bird
      @scriptManifest(author="KushyLOUD", category="THIEVING", bossness="OVER9000!!!!!")
      @author: KushyLOUD
       - 08/19/13 - v2.1 Released - Fixed IDs
       - 08/01/13 - v2.0 RELEASED. Much smoother logic circuit, less room for error. Requires two custom classes (DL below as well) - RSZone & RSBank. I made them to save time coding and improve flow.
       - 07/29/13 - v1.2 uploaded (Fixed food issues resulting from banking bug)
       - 07/29/13 - v1.1 uploaded (New: PAINT)
       - 07/29/13 - v1.0 uploaded.
       WORKED FOR 24+ HOURS after compiling!
       xp per hour counter is wrong lol.  updating soon. should say 5582. Do the math...
      ****(COMING SOON - alternate actions to take while low HP (i.e. fishing/cooking for more food if you have the skills and tools, right in Draynor!), more humanlike action, camera rotation, boredom factor, and more!)****
      ***NOTE: I don't recommend wearing any gear or anything you'd hate to lose! The bot has a method to kill itself after banking everything in your INVENTORY. Equipment may get lost if not stored in bank. I'll fix this in 2.1 ...
      The script continuously Pickpockets the Master Farmer in Draynor Village. If the player gets low on health, the bot eats the food you prefer to use, based on your choice at the menu. If you don't have it in your pack, it checks the bank. (CURRENTLY ONLY FISH OF ALL KINDS, more coming soon).  If you have no "preferred" food in your bank or inventory, the bot will continue pickpocketing until it gets low health, which is when it banks everything and starts falcon punching every market guard in sight. Once dead, your Hero will begin deathwalking back to Draynor. Yes, deathwalking, I said that RIGHT! Anyway, this script ran successfully for me for 24 hours before i even added the GUI, and even after that runs flawlessly! ------- (STAY POSTED: v2.1 coming soon)
      - RANDOMS
      - GUI
      ---------- DOWNLOADS BELOW SCREENSHOTS ------------



       Download v2.1 - [released 08/19/13]
       ----------------->>>  Kush_MasterFarmer_v2_1.zip  <<<------------------
      0) Download the zip, extract it somewhere, and copy the files to the clipboard for quick pasting.
      1) Locate your .tribot folder. Usually in (C:\Users\<username>\AppData\Roaming)
          1.a) If you don't see the Appdata folder, it's because it is a hidden folder! Two solutions:
                 [1] Goto (C:\Users\<username>) and goto the Tools tab (hit Alt if not visible). In the Tools tab, click Folder Options. From
                      there, click the View tab.  Then you'll see a big list of options. Look for the two standout Radio buttons. Click the one that
                      says "Show hidden files, folders, and drives". Click Apply, hit OK.  Then you'll see the AppData folder. Navigate to .tribot.
                 [2] Say f*** it and use Windows Search for ".tribot".
      2) Enter the Bin folder.
      3) Enter the scripts folder. If there is not a folder named "scripts" in the Bin folder, create it.
      4) Paste the extracted files (all 6 .class files) into the scripts folder (AND DELETE OLD ONES IF STILL EXISTING).
      5) RUN TRIBOT, run the script.
      old DL files:
       - v2.0 - 
       - v1.2:   
       - v1.1:  
       - v1.0:
      old SourceCode...
       - v1.2:   
       - v1.1:   
       - v1.0:   
      no longer open source. sorry.
      Have fun.
      - KushyLOUD
  • Our picks

    • We've heard your complaints - the TRiBot API could be much easier to use. We've been dedicating our time to improving the scripter experience here and spent the past year working on a new and improved API - the TRiBot Script SDK.


      The TRiBot Script SDK is an easy-to-use library for building TRiBot scripts. It is the recommended approach to building scripts moving forward over the old TRiBot API. It contains all the core things you need to build a script, and a ton of additional helpful stuff to get you using your scripts quicker. See the documentation section for everything offered, and check out the brief overview link too.


      The SDK was announced in preview here:


      It is now officially released. The official release guarantees we will support backwards compatibility for some period of time. See the 'backwards compatibility' section below for more info.


      How to use:

      There is multiple options, listed in the order they are recommended.

      1) Use the gradle template mentioned below

      2) Obtain through gradle

      Add this dependency: api("org.tribot:tribot-script-sdk:+")

      Add this repository: maven("https://gitlab.com/api/v4/projects/20741387/packages/maven")

      3) Take from your local filesystem in your .tribot/install folder. For example, on windows, you'd find it at "C:\Users\[user]\AppData\Roaming\.tribot\install\tribot-client\lib\tribot-script-sdk-[version].jar"



      Java docs: https://runeautomation.com/docs/sdk/javadocs/index.html?overview-summary.html

      Kotlin docs: https://runeautomation.com/docs/sdk/kdocs/index.html


      Backwards compatibility:

      We will be following a deprecation schedule whenever we perform a possible breaking change. We will deprecate the respective methods or classes and announce it in a topic. It will remain deprecated for some period of time (weeks or months), and then removed. This will give you time to fix anything, if we need to make a breaking change.


      Gradle template:

      Easily build scripts with a new pre-configured scripting gradle template


      Users of the current API:

      There is no plans to remove TRiBot API. It will still be available. However, non-critical bugs probably won't be fixed. The SDK does depend on some of the API so fixing some things in the SDK will indirectly fix the API. However, bugs that have existed in the API for awhile will likely not be fixed. It's recommended to use the SDK moving forward. Let us know if there's something the SDK is missing.


      Brief overview of the changes:


      Bug reports:

      Post bug reports in the bug reports section of the forums



      Let us know what your thoughts are! If you have questions, feel free to ask below or in discord.

        • Like
      • 0 replies
    • Support for the gradle launcher is being dropped. Read more about the new launcher here.
        • Like
      • 8 replies
    • What to expect from TRiBot moving forward.
        • Thanks
        • Like
      • 11 replies
    • TRiBot 12 Release Candidate

      The TRiBot team has been hard at work creating the last major version of TRiBot before the TRiBot X release. We've noticed many problems with TRiBot 11 with a lot of users preferring TRiBot 10 over 11. We've heard you, so we took TRiBot 10, added the new features introduced with 11, introduced some other new things, and created TRiBot 12. So without further adieu, here's TRiBot 12.
        • Sad
        • Like
      • 41 replies
    • Gradle is a build tool used to accelerate developer productivity.

      We recently setup a Maven repository (TRiBot Central) to make it easier for scripters to create scripts. Check it out here: https://gitlab.com/trilez-software/tribot/tribot-central/-/packages

      Furthermore, we've released a simple Gradle project to make it easy to run TRiBot and develop scripts for it. Check it out here: https://gitlab.com/trilez-software/tribot/tribot-gradle-launcher

      The goals of TRiBot Central are to:

      Deliver updates to TRiBot faster

      Better organize TRiBot's dependencies (AKA dependancies)

      Make it easier to develop scripts for TRiBot

      Make it easier to use and run TRiBot

      Note: TRiBot won't be able to run scripts from within this project until TRiBot's next release.
        • Like
      • 13 replies
  • Recently Browsing   0 members

    No registered users viewing this page.

  • Create New...