Jump to content
Search In
  • More options...
Find results that contain...
Find results in...
Buy OSRS Gold

dax

[Version 2] daxBlastFurnace [ABCv2] [ALL JOBS/BARS] [UP TO 400K+/HR]

Recommended Posts

Posting a BUG REPORT

 

Please read this and submit the report here.

 

You can buy credits with RSGP here

 

Y4pBklN.png

 

 

Posting a BUG REPORT

 

Please read this and submit the report here.

 

 

Last MAJOR update: Version 2.0

Version 2.0

  • Reworked ALL Job Priorities
  • Repairs now will also be triggered by bot state. Much more intelligent triggering.
  • Bars Added
    • Silver
    • Gold
    • Bronze
  • Potions
    • Stamina
  • Will finish ongoing load before getting bars from dispenser.
  • Start from anywhere - (Uses minigame teleport)
  • Banking should be significantly faster.
  • Paint
    • Status indicators
    • Pouch state
    • Tracks all stats
    • Profit calculator up to date (Using GE values as of 4/26/15)
    • All ore counts revealed

RbQHpbX.png

 

Thanks to all who helped with BETA.

 

 

There are TWO versions of the script.

 

ELITE VERSION (Gold Farmers) - CAN BE FOUND HERE

  • All modes enabled. Will be no different than the version that is currently active.
    • 1 Month 1 Instance (7.99 Credits)
    • 1 Month Unlimited (39.99 Credits)

 

PREMIUM VERSION - CAN BE FOUND HERE

  • Leecher mode disabled. If you want leeching mode enabled, purchase the Elite version.
    • 1 Month 1 Instance (4.99 Credits)
    • 1 Month Unlimited (24.99 Credits)

 

Both versions are capable of bringing in the same profits, however, it's simply the skill requirements that separate the two versions. ELITE version will only require a smithing level while PREMIUM will require one of the following stats since it's not capable of leeching:

  • 30 Strength or
  • 30 Crafting or
  • 30 Firemaking or
  • 30 Agility

 

Blast Furnace Instructions:

  • PUT ALL SUPPLIES ON TOP OF BANK.
  • START WITH A BUCKET IN INVENTORY.
  • IF YOU CAN FILL UP A ROLE, PLEASE DO SO. LEECHING DOES NOT INCREASE YOUR PROFITS, NOR DOES IT HELP THE TEAM. 
  • Start at Blast Furnace
    • Minigames - > teleport to Blast Furnace
  • Below 60 Smithing
    • Start Bot with cash-pile in inventory.
  • Stove Operator (Coke Filler) or AIO mode:
    • Start bot with spade in inventory
  • Using Energy Potions
    • Simply tick "Use Energy Potions" in GUI. Bot will use both Energy and Super Energy potions.
  • Using Coal Bag
    • Simply start bot with coal bag in inventory. Bot will detect and run accordingly.

 

NOTE: YOU DO NOT NEED ANY QUEST COMPLETED FOR BLAST FURNACE. PLEASE REFER TO THE GUIDE HERE IF YOU WANT TO LEARN MORE ABOUT THE MINIGAME:

 

http://2007.runescape.wikia.com/wiki/Blast_Furnace

 

 

 

Thank you syf54017 for providing me with such an incredible proggy. 109 hours and 32m profit!!

 

EDIT: updated to 121 hours and 35m!

 

0a2d449866.png

 

db9810d9b5.png

 

 

BUG REPORTS

 

Submit bug reports here

Edited by daxmagex
  • Like 6

Share this post


Link to post
Share on other sites

I bought this for iron bars, kind of disappointing it's not supported. Please make it clear in the description above or update!

 

I'll level my account up by hand and report back how it runs with steel bars.  

 

Edit: Dax added iron bar support within a few hours. Great scripter.

Edited by sedgy

Share this post


Link to post
Share on other sites

Looks awesome, do you think you can add 1-30 mode (Bronze and iron bars) allso? for lvling

 

Will be adding this in eventually. Bronze is kind of a special scenario where it requires primary and secondary in a 1:1 ratio so it'll require a separate set of logic.

 

I bought this for iron bars, kind of disappointing it's not supported. Please make it clear in the description above or update!

 

I'll level my account up by hand and report back how it runs with steel bars.  

 

Ask and you shall receive.

 

Version 1.1

  • Iron bar support
  • Like 1

Share this post


Link to post
Share on other sites

 

Will be adding this in eventually. Bronze is kind of a special scenario where it requires primary and secondary in a 1:1 ratio so it'll require a separate set of logic.

 

 

Ask and you shall receive.

 

Version 1.1

  • Iron bar support

 

 

Oh wow! Thank you! I really appreciate it  :D

 

 

Share this post


Link to post
Share on other sites

The script runs really well, currently running at 500 steel bars an hour or about 220k/hr. A little lower than expected but this is due to people not repairing the machine and having to wait long periods of time. I think the people who are not botting are waiting for the bots to fix it, but most bots are leeching. 

 

There is one bug i have noticed though so far, when the bar dispenser isn't working, the script runs and stands in a particular spot, it does this almost every time and it's liable to get you reported a lot, i'll post a screenshot below. 

 

CbAhpTA.jpg

 

 

 

 

 

Share this post


Link to post
Share on other sites

 

Oh wow! Thank you! I really appreciate it  :D

 

 

 

 

yw :)

 

The script runs really well, currently running at 500 steel bars an hour or about 220k/hr. A little lower than expected but this is due to people not repairing the machine and having to wait long periods of time. I think the people who are not botting are waiting for the bots to fix it, but most bots are leeching. 

 

There is one bug i have noticed though so far, when the bar dispenser isn't working, the script runs and stands in a particular spot, it does this almost every time and it's liable to get you reported a lot, i'll post a screenshot below. 

 

CbAhpTA.jpg

 

Script is waiting for a bucket to spawn so it can fill it with water and cool the furnace. Start bot with a bucket in inventory, I'll include that in main post. Hopefully, someone will throw in a bot running AIO mode to help out as it will benefit the whole team.

 

@daxmagex Just bought this script. Can't wait to post a proggy mate.

 

Sounds good :)

Edited by daxmagex

Share this post


Link to post
Share on other sites

@daxmagex

 

Got a problem with the iron bars. It keeps ending the script and states in the log, "SUFFICIENT COAL: false" then ends the script. 

 

I'll look into that, how many coal do you have left in bank? And did you see what happened when the script stopped?

 

EDIT: nvm, I'll remove the coal check for irons. Damn I derped out here.

Edited by daxmagex
  • Like 1

Share this post


Link to post
Share on other sites

I'll look into that, how many coal do you have left in bank? And did you see what happened when the script stopped?

 

EDIT: nvm, I'll remove the coal check for irons. Damn I derped out here.

 

No worries, thanks for the quick reply! I'm planning to buy the unlimited auths once i've trained some more accounts.

Share this post


Link to post
Share on other sites

No worries, thanks for the quick reply! I'm planning to buy the unlimited auths once i've trained some more accounts.

 

Sounds great, currently a quick fix would just be have at least 1 coal in bank. You can buy it at the blast furnace guy. I'll be fixing it later tonight for sure.

Share this post


Link to post
Share on other sites

Sorry for being the one that's always posting bugs! I just want to help you identify them  :D

 

The script always keeps extra coal in the machine, which is great, however, when making steel bars, you run out of coal before iron, it then stops the script because there is no coal in the bank. This means there is still about 120-150 coal in the machine and 120-150 iron in the bank.

 

I think this may be similar to the iron bar thing!  :D

Share this post


Link to post
Share on other sites
Guest

How exactly do you make money with this script? I have no idea what blast furnace is

Share this post


Link to post
Share on other sites

Sorry for being the one that's always posting bugs! I just want to help you identify them  :D

 

The script always keeps extra coal in the machine, which is great, however, when making steel bars, you run out of coal before iron, it then stops the script because there is no coal in the bank. This means there is still about 120-150 coal in the machine and 120-150 iron in the bank.

 

I think this may be similar to the iron bar thing!  :D

 

Currently, the script detects resources by the amount of materials available in bank. It's a much more reliable method as it doesn't require me to factor in the ores in the furnace + temporary memory. However, this may change in the future.

 

I'll be uploading version 1.14 later today that completely fixes the iron problem. 

 

How exactly do you make money with this script? I have no idea what blast furnace is

 

Usually, smithing at a regular furnace is slow and not much profit. Blast furnace allows for smithing at twice the speed and requiring only half the amount of coal needed, meaning massive profit.

 

You can look into here for a more in depth description: http://2007.runescape.wikia.com/wiki/Blast_Furnace 

 

 

EDIT: 4a9b26002d.png

 

 

Will be getting to rune soon :)

Edited by daxmagex
  • Like 1

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.

  • Similar Content

    • By Naton
      Intro/Download
      This is a free application which provides a graphical user interface to launch clients automatically using TRiBot's CLI
       
      Download: https://github.com/Naton1/Graphical-Client-Starter/releases (download links are under Assets)
      Source: https://github.com/Naton1/Graphical-Client-Starter/
       
      Loader/Updater: https://github.com/Naton1/Graphical-Client-Starter-Loader/releases
       

       
      Features:
      The best way to learn about all the features this free & open source software has is to test it out yourself!
       
      Instructions:
      Setup Application:
      Install TRiBot (if it isn't already installed).
      Download/Install the graphical client starter - you have two choices, use the windows installer (the .exe) (recommended for ease of use), or launch the .jar file. If you are not on windows you must use the jar. The jar file will require java 11+. A quick google of 'download java 11' should give you what you need.
      Configure the path to the location TRiBot was installed in the graphical client starter. This setting can be found at at Settings -> TRiBot Path in the graphical client starter. This must point to a directory named TRiBot. The Graphical Client Starter will try to find this folder automatically on start so it may already be set.
      Starting Clients:
      Click the "Add New Account" button to add new rows to the accounts table.
      Fill out the accounts to launch - Login Name and Script are required. The rest are optional. You can configure more table columns at Settings -> Account Columns.
      Click 'Launch Selected Accounts' to launch your TRiBot clients.
       
      Common Issues:
      If you are having trouble launching clients (ex. none appear), you can select Preferences -> Debug Mode for a bit more info on the TRiBot launch in the console.
      On Windows, you may have to launch the app as an administrator in order to launch a tribot client. (This will happen if you installed tribot to your program files, which is protected)
      You can easily solve this by downloading the windows installer and using that. You can right click an executable file and select "Run as Administrator".
       
      Proxies:
      There are a few ways you can configure proxies. The application will read your proxies from your tribot folder so you can just add them to tribot and they will appear when you open this application. You can also use the built-in proxy manager. Lastly, you can configure the proxy ip/port/user/pass directly in the accounts table by enabling the columns (at settings -> account columns).
       
      Application Arguments (optional, to launch the app programatically):
      -launchprofile profileName
      Automatically launch a specified profile
      -onlylaunch
      Doesn't display a GUI if the launchprofile arg is specified

      Ex. java -jar GraphicalClientStarter.jar -launchprofile last -onlylaunch
       
      World Selection:
      Use 0 or -2 for random members world
      Use -1 for random f2p world
      Leaving blank defaults to whatever TRiBot does
       
      Looking Glass:
      Go to Preferences -> Looking Glass and enable the option, and provide a path to the LG client you want to use. This will use the TRiBot CLI's built in looking glass support.
       
      Importing from text file:

      This feature allows you to specify the format your files are in.
      This may look confusing, but I promise you it's very simple. Copy and paste a line from your account file, and replace each value that you want to input with the corresponding symbol. 
      It assumes each line follows the same format in your file.
      For example, the following line
      ${username}:${password}:${world}
      Would capture the following text
      naton:mypassword:15
      And create an account with the username naton, password mypassword, and world 15
       
      Tips:
      Try Preferences -> Selection Mode ->  Cell Selection Mode. This will make the table selection similar to how Excel/Google Sheets work. You can do cool things which save time like the following (this uses copy pasting):
      https://i.imgur.com/dEPWNvT.mp4
      You can right-click the column headers to bulk configure values for the selected rows (including the selection column header itself)
      Launch Inactive Accounts (under Settings) can make sure you don't double-launch any clients (launches all selected accounts where there isn't a corresponding active client with the same username)
      Take the time to become familiar with the settings and features of this application. You will thank yourself later when you save yourself a lot of time.
       
      Please notify me of any issues.
       
       
    • By Virt
      My name is Case sensitive on discord Becareful of imposters - I NEVER TRADE VIA PMS EVER. 
      Unique ID: 460089618331860993
      or click here to join my discord and open a ticket:  https://discord.gg/b47uuQH  
       
      Why use VirtGold as your Service provider?
      in business since 2016
      over 250 Positive feedback from customers
      Over $1k in donations across various forums
      Everything is 100% hand trained and all work are monitored
      Provide sufficient updates frequently 
       












       
       


      Terms of services ~:
       
       
       
       
       





    • By mjdge
      The open beta is now over! I have been given a lot of great feedback. I will work hard on the script!
      After a few months of on and off working on the script. I have decided to try an open beta release of my Last Man Standing script!
      I will continue to work on the script over the coming weeks and months!
      I know that it could definitely do with some improvements so that's why this is a Beta release (I'll release it again when everything is done)
      A couple of the current features:
      Prayer Flicking
      Drinks potions
      Eats and combo eats
      Has a basic paint that tracks information such as: Points earned this session, Total Points, Average Points Per Game and Games Played
      If you would like to see a full list of features and things I hope to implement, click here
      All feedback, bug reports and recommendations are greatly appreciated!
    • By mjdge
      The script is now on the repo in the form of an open beta! You can find the release thread here and the script here
      I'm developing a bot for the Last Man Standing game (I'm sure we've all seen them or heard of them by now)
      The script will likely be relatively cheap (Unlimited accounts for a couple dollars a month)
      I was wondering what features the community would like to see in it
      The end goal is to be able to farm points reliably with lower ban rates than other LMS scripts and to be able to beat other scripts and some players
      Feature List:
      Before Games World hop to the official LMS competitive world Automatically teleports using the LMS minigame teleport Completes the LMS tutorial if not completed Right clicks to join games During Games Turns on run Turns on protect from range prayer Turns on piety Turn on Auto-Retaliate if it isn't on Switch to ranging gear Custom prayer setup (Priority: 3) Automatic prayer flicks Custom gear switches (Priority: 2) Automatic gear switches Eats when below certain health Drinks potions at the beginning of the game Tick eats a Shark + Brew + Karambwan when below a certain very low health Moving to safe zones (Priority: 3) (I can currently detect which safezone we need to go to but don't know how to get there) Opening chests with keys from kills (Priority: 1) Switching gear if it's better (Better cape etc.) (Priority: 1) Implementing new gear into switches (i.e replacing ranged crossbow swap with Heavy ballista etc.) (Priority: 1) Using weapon specs After Games Re-queues Redeems points automatically (Priority: 3) Choose what item you want to redeem automatically (Priority: 1) Mule mode to mule away redeemed prizes (Priority: 1) (Absolutely no clue how to do this) Miscellaneous Anti Ban Compliance All ABC2 Timed Actions (Except XP because it's not needed and logout because it's glitchy to begin with + we're in an instanced minigame) Randomized delays between actions ABC2 Reaction times on flicks/gear switches (Priority: 1) Occasionally "forgetting" to switch prayers or gear (Priority: 1) Paint Games played/Games per hour Points won/Points per hour Points redeemed (Priority: 1) Approximate GP made/GP per hour (Priority: 1) GUI (Priority: 3) This would likely just allow all the options mentioned in the other sections Green - Implemented and working
      Yellow - Being implemented or glitchy (Priority means 1 is lowest 5 is highest)
      Red - Not implemented
      Current Glitches/Downfalls (Hopefully going to fix):
      If an account has already used a minigame teleport in the last 20 minutes it will become stuck in a loop of trying to teleport until the 20 minutes are up Any feedback or recommendations are greatly appreciated. If you would like to be one of the (free) beta testers for the script leave a reply or PM me
    • By dax
      Click the spoiler for more progress reports!
       
       
       
      Posting a BUG REPORT
      Please read this and submit the report here.
      You can buy Credits with RSGP instantly here!
    • By Dentist
      Script now work perfectly fixed all bugs 
      Recommend zooming all the way out 
      Required 1- +50 Agility and Thieving
                        2- Stamina potion and energy potion [Recommended 10 stamina(4) , 50 Energy(4)]
      It will get the 5 crates for you then logout 
      Still In beta please report any bug 
      almost active 24/7 on discord pm if u need any thing ..  https://discord.gg/PBwAQJn
      Get script from here 
      https://tribot.org/repository/script/id/3315-rouge-den/
       
      to add [1- level 80 shortcut support 
                    2- more ABC2 
                                                3- Custom Stopping condition 
      4- custom potions support 
       
    • By Beg
      Cooks at Rogues Den (Burthoupe) using the well-known permanent fire.
      Supported Food:
      Shrimps, Anchovies, Karambwanji, Sardine, Karambwan, Herring, Mackerel, Trout, Cod, Pike, Salmon, Tuna, Lobster, Bass, Swordfish, Monkfish, Shark, Dark crab.
       

      Makes fire on a pre-established area close to the bank, and cooks on it. Mostly thinking about free-to-play users, however, included a few pay-to-play banks as well. 
      Supported Banks:  
      Lumbridge Top, Varrock West, Varrock East, Edgeville, Grand Exchange, Falador West, Falador East, Draynor Village,  Duel Arena, Clan Wars, Al-Kharid.
      Castle Wars, Catherby, Seers (Camelot), Ardougne West, Ardougne East, Yanille, Nardah, Tzhaar City.
      Supported Food:  
      Shrimps, Anchovies, Karambwanji, Sardine, Karambwan, Herring, Mackerel, Trout, Cod, Pike, Salmon, Tuna, Lobster, Bass, Swordfish, Monkfish, Shark, Dark crab.
                                
       
      Cooks food on a range/stove/oven.
      Supported Ranges:  
      Al-Kharid, Lumbridge, Falador, Edgeville, Varrock East.
      Cooking Guild, Catherby, Nardah.
      Supported Food:  
      Shrimps, Anchovies, Karambwanji, Sardine, Karambwan, Herring, Mackerel, Trout, Cod, Pike, Salmon, Tuna, Lobster, Bass, Swordfish, Monkfish, Shark, Dark crab, Plain pizza, Baked potato, Sweetcorn.
       

      Makes food using two ingredients on each other.
      Supported Banks:
      Every bank supported by Banking API.
      Supported Food:
      Jug of Wine, 
      Tuna potato, 
      Anchovy pizza, Meat pizza, Pineapple pizza, Pizza base, Incomplete pizza, Uncooked pizza,
      Pastry dough, Pie shell, Uncooked berry pie, Uncooked meat pie, Raw mud pie, Uncooked apple pie, Raw garden pie, Raw fish pie, Raw wild pie, Raw summer pie.
                                      
       

      The rules for script argument are the following:
      1. Each task is separated by a vertical bar, "|"
      2. Each task setting has an associated key and value, "key=value"
      3. Each task setting is separated by a comma, ","
      4. Option settings follow the same rules as task settings  
      5. Not case-sensitive

      Available task settings:
      type - indicates which type of task it is. Available options are "Rogues den", "Fire", "Range" or "Make item".
      first_supply - the first supply name you want to use.
      supply - same as above (for backwards compatibility).
      second_supply - the second supply name you want to use. Only applies to make-item tasks.
      product - the product name you want to make.
      logs - the logs name you want to burn. Only applies to cooking on self-made fire tasks.
      amount - the amount to cook on the task. If this setting is not present, or a number of zero or lower is set, the amount is ignored.
      stop_level - the cooking level that interrupts the task. If this is not present, or a number of zero or lower is set, the stop level is ignored.
      select_option - the option to type when using the keyboard to select the right option when choosing the food to cook (e.g. 1, 2, 3, 4, ...)

      Available option settings:
      mouse_speed - indicates the average mouse speed to use.
      save_on_system_update -  when set to true, attempts to save the task progress on a .dat file right before an ingame update. The task can then be reloaded on gui.
      antiban_reaction - enables with value "true" or disables with value "false" the antiban reaction sleep after an inventory has finished cooking.
      antibug_debug - to print anti-ban actions debug on bot debug panel. "true" to enable, "false" to disable.
      toogle_roofs - to toogle roofs from buildings. "true" to enable, "false" to disable.
      close_with_esc_button - to use escape keyboard button to close the bank. "true" to enable, "false" to disable.
      select_with_keyboard - to use the keyboard to select the right option when choosing the food to cook.

      Example:
      type=rogues den, first_supply=raw shrimps, product=shrimps, amount=1000, select_option=1 |
      type=range, first_supply=raw salmon, product=salmon, amount=10000, stop_level=70, select_option=1 |
      type=fire, first_supply=raw lobster, product=lobster, logs=magic logs, amount=5000, stop_level=75, select_option=1 |
      type=make item, first_supply=jug of water, second_supply=grapes, product=jug of wine, amount=10000, select_option=1 |
      mouse_speed=100, save_on_system_update=true, antiban_reaction=false, antibug_debug=true, toogle_roofs=true, close_with_esc_button=true, select_with_keyboard=true

      Notes:  Set amount equal to 0 to ignore amount. Set stop level to 0 to ignore stop level.       Ability to create or load one or multiple tasks to be executed. Combine different methods, food, amounts or stop level at your own will.     Save the current script's state. This can be done either on Script's GUI or Script's Paint.  The data file will be stored at .tribot/beg_scripts/Cooking/'your_input'.dat. If enable on GUI, a game system update will generate an automatic save which will be stored at .tribot/beg_scripts/Cooking/'your_rs_name current_date (current time)'.dat.   Load any previous saved state. This can only be done upon start at Script's GUI.                                                      
       Got any progress report worth sharing? Let me know!
       

      Report any bug, missing feature, supported place or food below. If justified, it will be included to the script.
       

       
    • By Al Storm
      Hello premium scripters,
      Request: Coker for blast furnace pump

      Description: In non-blast furnace worlds, the pump and furnace are not occupied with dwarfs. There is already a script to fully afk the pump for strength EXP, just not a script that fills up spades (28) with coke and fills the stove every few minutes. I would like a script that just fills up the spades and fill the stove a bit randomly like every 3-5 minutes so it's less detectable and more human-made. Maybe a little afk in between like examine stuff or rotate the screen in between if this is possible.  
       
      Payment Amount: Since I never requested a script, I have no idea of how much time you will have to spend on making a script. I hope it is possible to come to an price and leave this open for now.
       
      Time: I don't need it right away, but as soon as possible would be nice.
       
      Additional:
  • Our picks

    • TRiBot 12 Release Candidate

      The TRiBot team has been hard at work creating the last major version of TRiBot before the TRiBot X release. We've noticed many problems with TRiBot 11 with a lot of users preferring TRiBot 10 over 11. We've heard you, so we took TRiBot 10, added the new features introduced with 11, introduced some other new things, and created TRiBot 12. So without further adieu, here's TRiBot 12.
        • Sad
        • Like
      • 17 replies
    • Gradle is a build tool used to accelerate developer productivity.

      We recently setup a Maven repository (TRiBot Central) to make it easier for scripters to create scripts. Check it out here: https://gitlab.com/trilez-software/tribot/tribot-central/-/packages

      Furthermore, we've released a simple Gradle project to make it easy to run TRiBot and develop scripts for it. Check it out here: https://gitlab.com/trilez-software/tribot/tribot-gradle-launcher

      The goals of TRiBot Central are to:

      Deliver updates to TRiBot faster


      Better organize TRiBot's dependencies (AKA dependancies)


      Make it easier to develop scripts for TRiBot


      Make it easier to use and run TRiBot


      Note: TRiBot won't be able to run scripts from within this project until TRiBot's next release.
        • Like
      • 10 replies
    • Hi everyone,

      I'd like to thank everyone for their patience in this transition period. Since last week, we've worked out the remaining bugs with this integration.

      Some users have still been having issues with connecting their forums account to their Auth0 account. To resolve this, we've imported all forums accounts into Auth0.

      Unfortunately, the accounts which were imported today were using an unsupported password hashing algorithm. Hence, random passwords were set during the import.

      What does this mean for me?

      If you've previously linked your forums account to your Auth0 account, you don't have to do anything. Nothing changes for you.


      If you haven't logged in via our new login yet,

      Try logging in with your forums email address and the last password you used


      If you are unable to login, please use the "Forgot password" tool on the login page:
      Follow the instructions to reset your password
       
        • thonking
        • Like
      • 17 replies
    • Hello everyone,

      Last week we tried to roll out Auth0 Login, but we lost that battle. Now it's time to win the war!

      Important changes

      When logging into the client, you'll now have to enter your Auth0 account credentials instead of your forums credentials

      Note: 2FA is still handled through your forums account (for the time being)



      Changes for existing users

      You'll have to link your Auth0 account to your forums account here: https://tribot.org/forums/settings/login/?service=11


      Auth0 accounts have been created for most existing users. Please use your forums email address and password to login.



      Important notes

      Make sure to verify your email address upon creating a new Auth0 account


      When we mention your Auth0 account, we mean your account used for auth.tribot.org as displayed below
      • 81 replies
    • To better support the upcoming changes (TRiBot X, new repository), we're switching our login handler to Auth0. Instead of logging in with the standard form, you'll now be required to login through our Auth0 application.

      All existing accounts which have been used within approximately the past year have been imported into Auth0 using the same email and password combination which has been stored on the forums.

      What does this mean for users?

      Your account credentials are now even more securely stored


      You'll be able to login via Facebook, Google, and others in the future


      Is there anything users have to do differently now?

      Existing users: You'll have to login with the standard login, open your Account Settings, then link your Auth0 account


      New users: You'll be redirected to our Auth0 app (auth.tribot.org) where you'll be able to create an account


      Why was this change made?

      The new apps we are creating (such as the new repository) aren't able to use the forums to handle user logins


      To centralize all user accounts in one area


      To ensure that the client login doesn't go down when the forums are having problems


      To speed up our development


      Other considerations

      There's no documentation or official support for using Invision Community combined with Auth0, so there are still a few kinks we're working out


      We're in the works of creating an account management panel specifically for Auth0 accounts (ETA August)


      It's not possible to change email addresses for the time being (this will be resolved this August)


      Changing passwords is a weird process for the time being. To change your password, you'll have to use the "Don't remember your password" tool on the Auth0 login page
        • Like
      • 11 replies
  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...