By
Worthy,
in Money Making
-
Similar Content
-
By Worthy
AIO Constructor
By Worthy
Features
Construct Any Item Including: Planks Bagged plants - FARMING XP! Refills watering cans in house sink Or fetches pre-filled watering cans from the bank Nails Marble Mythical cape
Multiple Banking Methods Manual banking - Rimmington/Falador, Yanille Ring of Dueling and House Teleports Phials unnoting planks Servant fetch from bank Servant un-note items from inventory
Synchronized Servant Support Cook Butler Demon Butler
User Experience This entire script has been rewritten optimized for efficiency and flawlessness Antiban Compliance (ABC2) Level 10/10 Quick and easy to use GUI setup Script arguments (skip GUI set-up) Slick mousepaint and paint Dynamic signature system (more info below) Hiscores page
Set-up
Start with just a hammer and saw in Inventory. Only if using Servants have coins in Inventory too, or keep them in the servant's money pouch. If using Servants Un-noting have noted planks in Inventory too Only if using Phials Unnoting have coins and noted planks (just the type you are using) in Inventory too. Only if using RoD/Tele Banking have house tabs in Inventory too.
Recommended Items to Build
Levels 1 - 19 → Crude Wooden Chairs (need 138 planks and nails) Levels 19 - 33 → Oak Chairs (need 238 oak planks) Levels 33 - 70 → Oak Larders Levels 70 - 99 → Oak Dungeon Doors
OR Levels 52 - 99 → Mahogany Tables (fastest if you have $$)
OR Levels 47 - 99 → Mythical Capes (requires Dragon Slayer 2 but saves money)
Creating a preset
Make sure to create the preset using your mouse only! (no hot-keys).
Notes
If you find the bot is building and removing items very slowly, you can adjust the ABC2 slider in the second tab of the GUI.
All you need to due is drag the slider ABC2 Reaction Durations towards the Fastest end.
Similarly, if you find the bot's mouse is leaving the game too often, you can adjust the ABC2 Mouse Leave Game Frequency slider.
The parameters for the random AFK frequency and duration (mean and standard deviation) determine how frequently the bot will randomly AFK and how often it will do so. To help visually the distribution of when and how long it will AFK, use this website: https://onlinestatbook.com/2/calculators/normal_dist.html and plug in the corresponding values for the mean and standard deviation (SD) to visualize the probability graph.
For example, if the Random AFK Frequency is set to use a mean of 45 minutes and standard deviation (SD) of 15 minutes, the bot will pick a time to AFK based on this graph:
Using the area probability on the link above, we can see there is a roughly 68% chance (the gray region), that the bot will decide to AFK between the 30 and 60 minute mark.
Script Arguments
Click to buy for a month or trial it for 1 day, for $1:
Bulk auth discount available as well.
Troubleshooting and Bug Reports
If you are experiencing weird issues, I highly recommend running this jar to clear all existing caches:
Check your hiscore ranking here!
Grab your dynamic signature by modifying this url:
http://www.worthy.rs/tribot-php/AIOConstructor/sigs/YOUR_TRIBOT_USERNAME_HERE.png All you need to do is change the part which says `YOUR_TRIBOT_USERNAME_HERE` to your actual TRiBot username!
Happy Botting!
- Worthy
-
By Worthy
Anvil Smither
By Worthy
Features
Anvil Locations: Western Varrock Central Varrock Easter Varrock Falador (requires Doric's Quest completion)
Progressive Smithing: Smiths the highest level item available to maximize XP Taken from https://oldschool.runescape.wiki/w/Pay-to-play_Smithing_training Options available to customize the progressive items:
Money Making Smithing (~1m/hr): Rune platelegs Rune plateskirt Rune 2h sword
GE Support Sells smithed items to get GP for more bars if needed Starts a high price and relists them for lower if they don't sell Buys more bars when we are out of bars Completely adjustable parameters on quantities of bars to buy for every player's needs
Other Features World hopping between X and Y minutes Either hop to random p2p/f2p depending on what we're already in Or hop among an inputted list of worlds Option to always stay in members worlds (can be used in f2p) Option to stop at a desired smithing level Minimize the client when the script starts Maximize the client when the script ends Save and load GUI profile settings Use these profiles to load the script via arguments without having to fill out the GUI again!
Advanced antiban (see below in more detail) Customize ABC2 reaction delays Customize ABC2 leave game frequencies Customize frequency of random AFK Customize duration of random AFK Built in ABC2 level 10 support
Set-up
No set up required! The bot will navigate anywhere using Daxwalker. It will even buy a hammer from the GE if you don't have one!
Advanced Antiban
If you find the bot is waiting too long in between reactions (like noticing that all the bars in your inventory are done being smithed), you can adjust the ABC2 slider in the second tab of the GUI.
All you need to due is drag the slider ABC2 Reaction Durations towards the Fastest end.
Similarly, if you find the bot's mouse is leaving the game too often, you can adjust the ABC2 Mouse Leave Game Frequency slider.
The parameters for the random AFK frequency and duration (mean and standard deviation) determine how frequently the bot will randomly AFK and how often it will do so. To help visually the distribution of when and how long it will AFK, use this website: https://onlinestatbook.com/2/calculators/normal_dist.html and plug in the corresponding values for the mean and standard deviation (SD) to visualize the probability graph.
For example, if the Random AFK Frequency is set to use a mean of 45 minutes and standard deviation (SD) of 15 minutes, the bot will pick a time to AFK based on this graph:
Using the area probability on the link above, we can see there is a roughly 68% chance (the gray region), that the bot will decide to AFK between the 30 and 60 minute mark.
NOTE: If the random AFK frequency and duration parameters are confusing, I recommend leaving them on their default values!
Script Arguments
Once you have saved a GUI settings profile, you can load it using the argument settings:profile_name without having to fill out the GUI again.
By default, the script additionally saves the most recent GUI settings as "last".
So if you would like to load the last settings you used via arguments you pay input settings:last into the argument box (without needing to manually save a GUI settings profile).
Click here to use it!
Progress Reports
Example of smithing from level 47 to 65 in 6 hours, progressively using the best item to smith, while restocking when out of bars!
Troubleshooting and Bug Reports
If you are experiencing weird issues, I highly recommend running this jar to clear all existing caches:
Happy Botting!
- Worthy
-
-
By Rushian
Hi everyone.
I have a problem, i lauched a script, and my pc lagged so i restarted it, and after that i got a window called something like "you cant lauch more than one script at one time", so i bought VIP for 6$ and started a bot for one hour. After that i wanted to start other script, that i have bought, but i had problem with loggining in, but i have solved that (that was a issue with Auth0). And i saw, that i dont had any scipt except this one i have bought (Gods Orbs), and i couldnt lauch it, cuz i again got window called "you cant lauch more that one script at one time". Can you fix that? I dont want to pay twice for script and VIP. And sorry for my english, its not my mother launguage, i think you would respect that :D.
-
By Fluffee
Fluffee's Server Setup 3.0
As some of you may know, I released an automated server setup script a little over a year ago. Albeit that script worked well, I was never fully satisfied with it, as I found it to be kind of messy to use. As a result, I rewrote the script, and restructured it, to add more, and stronger support for the different versions of Debian, the different versions of CentOS and the different versions of Ubuntu. However, with so many different Operating Systems being supported, and many different server providers having different setups, it's hard for me to test every possible scenario on my own. Which is why I've been privately handing this script out, and am now publicly looking for help.
What does the script do?
Similar to my previous setup script, this script changes the SSH port and creates a new user for connecting and using the server and disables root SSH connections; it installs the latest version of TightVNC Server (1.3.10) and sets that up with the desired port and password. It installs JDK 102 (32 or 64 bit depending on the OS), and installs TRiBot and OSBuddy and sets up the appropriate .jar file associations.
What operating systems does it support?
- CentOS (6.x, 7.x, 8.x) (32 and 64 bit)
- Debian (7.x, 8.x, 9.x, 10.x) (32 and 64 bit)
- Ubuntu (12.x, 14.x.16.x, 18.x, 20.x) (32 and 64 bit)
Does it work?
As far as I know, yes it does in fact work, and it works well if I might add. However, given that I can't test every possible setup, there is the potential for differences and issues
How do I run the script?
Login as root to a fresh VPS/dedi running one of the supported operating systems. From there run the commands listed below and follow the onscreen instructions. For those who would like to see the script's code, it can be found on my bitbucket here. The commands to run are as follows:
(curl -kO https://bitbucket.org/teamfluffee/fluffees-server-setup/raw/master/fluffees-server-setup.sh || wget --no-check-cert https://bitbucket.org/teamfluffee/fluffees-server-setup/raw/master/fluffees-server-setup.sh) && chmod +x fluffees-server-setup.sh && bash fluffees-server-setup.sh -v Version History
-
By jh1n3s
Has anyone been able to fix this? I keep getting told to go use OSBuddy. But I have all the good plugins on OpenOSRS.
I am using the open-osrs shaded jar like it said to.
It would totally change the game for me if I was able to use that client w/tribot without crashing every single time.
Paying top dollar for whoever can assist and fix.
-
By Optimus
Optimus AIO Firemaker is a free All In One Firemaking script that's efficient and easy to use.
Overview:
Start the script with one click. It will automatically detect which logs to use from your inventory or bank, and progressively train your firemaking until you run out of logs.
~ Withdraws tinderbox if you don't have one
~ Supports all logs types
~ Progressive training - Will automatically start burning better logs if they're available
~ Smart algorithm to detect best area to burn
~ One-tick burning
~ Logs out when out of logs
~ ABC2 Antiban
~ Sleek paint
~ Lit AF
Supports 8 different locations:
(The script will automatically detect the nearest location)
~ Varrock West
~ Varrock East
~ Grand Exchange North
~ Grand Exchange South
~ Falador East
~ Draynor Village
~ Duel Arena
~ Seers Village
~ More to come (Open to suggestions).
Gallery:
Free repository link:
Hope you all enjoy the script! Feedback is appreciated
-
By Worthy
AutoTalker Infinite
By Worthy
Features
As many lines as you want to autotalk (will scroll down indefinitely) Custom time interval delay ABCL 10 Auto Accept Trades Alert with a popup window the accepted trade (perfect for leaving the bot running and doing something else, while it talks and accepts trades. It will then alert you a trade has been established, and you can take over).
Steps
Make sure to select the Trade tab when logged in:
Click to add:
Enjoy!
-
By Nullable
What is Tribot Mobile?
Tribot Mobile is a new client that works on Android's version of Oldschool Runescape. Being in development for over several months, Tribot Mobile is currently in available to Developers and Scripters, and is completely usable. It uses your PC to interact with a connected Android device (physical or emulator) and plays OSRS for you!
Unlike the normal tribot client, this client has absolutely no interaction with the OSRS internals. It is strictly color/image based, and provides functionality through its API, as well as popular vision libraries, such as Tesseract and OpenCV.
Demo:
TribotMobileDemo.mp4
FAQ
When will this be available?
Most likely this summer (2020)
Who will have access?
For the public release, only VIP members or higher will likely to be able to use the client at all.
Can this run without a PC?
No, a computer is required to actually run the bot logic. It connects to your phone via USB, or via an emulator that you're running also on your PC.
Being color-based, will scripts be different?
Yes. Scripting for color is notoriously more difficult, thus scripts won't be as advanced. Over time, we plan on creating things like a webwalker and using machine learning to find objects/NPCs. However, this is long term and well after the release.
How is the banrate?
Both myself and others have tried to get banned using this. We can't do it. I gave up at 40m fletching XP on two accounts (my main and a fresh). I'll try again once we develop some more scripts.
Tribot Mobile will have tons of antiban. Just like the normal client, it uses algorithms that mimic human clicking patterns to ensure that no botlike behavior can be observed by Jagex. In addition, it never even touches the game client. There is absolutely zero possibility of client detection, or even client suspicion. It's completely invisible.
From the ground up, the Tribot Mobile API will have options for realistic reaction times, sleeps, clicking patterns, and more.
How are scripts written?
Scripting for Tribot Mobile will be roughly similar to the normal client. However, Tribot Mobile is written entirely in Kotlin. This means that writing scripts in Kotlin will be the easiest, but Java can also be seamlessly used if you prefer.
Also, the API will be 100% open-source.
----------------------------------------------------------------------------------------------------------------------
If anyone has more questions, be sure to post here, or ask me discord.
Happy Botting
-
-
Our picks
-
TRiBot Script SDK Official Release
Naton posted a topic in News and Announcements,
We've heard your complaints - the TRiBot API could be much easier to use. We've been dedicating our time to improving the scripter experience here and spent the past year working on a new and improved API - the TRiBot Script SDK.
The TRiBot Script SDK is an easy-to-use library for building TRiBot scripts. It is the recommended approach to building scripts moving forward over the old TRiBot API. It contains all the core things you need to build a script, and a ton of additional helpful stuff to get you using your scripts quicker. See the documentation section for everything offered, and check out the brief overview link too.
The SDK was announced in preview here:
It is now officially released. The official release guarantees we will support backwards compatibility for some period of time. See the 'backwards compatibility' section below for more info.
How to use:
There is multiple options, listed in the order they are recommended.
1) Use the gradle template mentioned below
2) Obtain through gradle
Add this dependency: api("org.tribot:tribot-script-sdk:+")
Add this repository: maven("https://gitlab.com/api/v4/projects/20741387/packages/maven")
3) Take from your local filesystem in your .tribot/install folder. For example, on windows, you'd find it at "C:\Users\[user]\AppData\Roaming\.tribot\install\tribot-client\lib\tribot-script-sdk-[version].jar"
Documentation:
Java docs: https://runeautomation.com/docs/sdk/javadocs/index.html?overview-summary.html
Kotlin docs: https://runeautomation.com/docs/sdk/kdocs/index.html
Backwards compatibility:
We will be following a deprecation schedule whenever we perform a possible breaking change. We will deprecate the respective methods or classes and announce it in a topic. It will remain deprecated for some period of time (weeks or months), and then removed. This will give you time to fix anything, if we need to make a breaking change.
Gradle template:
Easily build scripts with a new pre-configured scripting gradle template
Users of the current API:
There is no plans to remove TRiBot API. It will still be available. However, non-critical bugs probably won't be fixed. The SDK does depend on some of the API so fixing some things in the SDK will indirectly fix the API. However, bugs that have existed in the API for awhile will likely not be fixed. It's recommended to use the SDK moving forward. Let us know if there's something the SDK is missing.
Brief overview of the changes:
Bug reports:
Post bug reports in the bug reports section of the forums
Let us know what your thoughts are! If you have questions, feel free to ask below or in discord.
- 0 replies
Picked By
Encoded, -
Tribot Installer/Launcher Changes (Action Required)
Nullable posted a topic in News and Announcements,
Support for the gradle launcher is being dropped. Read more about the new launcher here.- 8 replies
-
The Future of TRiBot
Encoded posted a topic in News and Announcements,
What to expect from TRiBot moving forward.- 11 replies
Picked By
Encoded, -
TRiBot 12 RC
TRiLeZ posted a topic in Client Updates,
TRiBot 12 Release Candidate
The TRiBot team has been hard at work creating the last major version of TRiBot before the TRiBot X release. We've noticed many problems with TRiBot 11 with a lot of users preferring TRiBot 10 over 11. We've heard you, so we took TRiBot 10, added the new features introduced with 11, introduced some other new things, and created TRiBot 12. So without further adieu, here's TRiBot 12.-
- 40 replies
Picked By
TRiLeZ, -
-
TRiBot Central & TRiBot Gradle Launcher
TRiLeZ posted a topic in News and Announcements,
Gradle is a build tool used to accelerate developer productivity.
We recently setup a Maven repository (TRiBot Central) to make it easier for scripters to create scripts. Check it out here: https://gitlab.com/trilez-software/tribot/tribot-central/-/packages
Furthermore, we've released a simple Gradle project to make it easy to run TRiBot and develop scripts for it. Check it out here: https://gitlab.com/trilez-software/tribot/tribot-gradle-launcher
The goals of TRiBot Central are to:
Deliver updates to TRiBot faster
Better organize TRiBot's dependencies (AKA dependancies)
Make it easier to develop scripts for TRiBot
Make it easier to use and run TRiBot
Note: TRiBot won't be able to run scripts from within this project until TRiBot's next release.- 15 replies
Picked By
TRiLeZ,
-
-
Recently Browsing 0 members
No registered users viewing this page.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now