Jump to content
Search In
  • More options...
Find results that contain...
Find results in...
Buy OSRS Gold

Fluffee

[Tutorial] Run Most Application Through a Proxy (Windows/Linux) Most Browsers and OldSchool Clients!

Recommended Posts

How to Run Most Applications Through a Proxy on both Windows and Linux

Windows Instructions

Note: Chrome and Firefox portable do not work with WideCap.

1. Download WideCap from here (http://widecap.ru/en/download/)
2. Run through the installer, and launch WideCap, you should see this screen.
1464452cee.png
3.Go ahead and click on Settings (First option under the Widecap section on the left hand side). Then uncheck the box that says Run with system startup.
59fdbb3822.png
4. Now go ahead and click on New proxy (First option under the proxies section on the left hand side).
5.You should see this screen, in the top field enter the IP address and port (IP:Port format). Confirm that the protocol is set to SOCKS v5 (which is the default), and tick the box for Authentication if necessary. If using an authenticated proxy, enter your username in the login field, and obviously your password in the password field. Then hit the Create New button, next to Chain, and type in a name for your Proxy, then Hit OK
61b2026fb6.png
6. Now that you're back to the main screen, click on the Proxy List section (Second option under the proxies section on the left hand side). Right click on your newly added proxy, and click check selected, to make sure you entered all the information correctly. If the status field rolls over to OK, you're good to go, and can move on to the next step
d30a0e1f41.png
7. Find WideCap in your System tray, right click, and uncheck the box that says Enable Widecap.
11610f949c.png
8. Click on View Programs (Second option under the Programs section on the left hand side). Then drag and drop the icon for the application you want to proxify (run behind a proxy) into WideCap. WideCap supports the proxifying of both .exe and .jar files!
73c595fd6c.gif
9. Right Click on your newly added program, and click on Modify Application, you should see a similar screen depending on what you added. Then click on Create New... (to create a new rule)
581276e221.png
10. In the Chain tab, select the Proxy Chain you created earlier, then under the Main tab, give your new rule a name and hit OK. Then Hit OK again on the modify Application screen.
2138baa178.gif
11. Hit Apply and OK in the main window of WideCap, and then find it in your System Tray again, but this time click the box to Enable Widecap
12.Open your Proxified application, and check to see if the proxy worked! If your IP is changed, congrats, you've got WideCap working!

Linux Instructions (Based off of a Debian Installation)

1. Open a new terminal and run this command

sudo apt-get update && sudo apt-get install -y proxychains

2. Now that proxychains is installed, we're going to go ahead and create a user specific configuration file. To do this, we'll make a directory, then copy the standard proxychains configuration file to it and change the ownership of the configuration file to your user. Run the command below as your user.

mkdir ~/.proxychains/ && cp /etc/proxychains.conf ~/.proxychains/proxychains.conf && sudo chown ${USER:=$(/usr/bin/id -run)} $HOME/.proxychains/proxychains.conf && sudo chgrp ${USER:=$(/usr/bin/id -run)} $HOME/.proxychains/proxychains.confroxychains.conf

3. Once the command is finished, open the proxychains config file in your favorite Linux text editor, for ease of use, I'm going to use nano. To install nano run this command

sudo apt-get install -y nano

To edit the proxychains config file, with nano, run this command

nano ~/.proxychains/proxychains.conf

4. Now, what you'll want to do is scroll all the way down to the bottom, and you should see something like this
4837941af6.png

That last line that says

socks4    127.0.0.1    9050

That's the line we'll be editing. Firstly, we'll go ahead and erase everything on that line, don't worry we'll put it back. The format for the configuration file is

Proxy Type(lowercase) (tab) IP address (tab) Port (tab) Username (tab) Password

Therefore if your proxy was a Socks5 proxy, with an IP of 192.168.1.1, a port of 1080, a username of Fluffee and a password of TRiBot, your final line would look like this:

socks5    192.168.1.1    1080    Fluffee    TRiBot

So, go ahead and modify your last line to fit your own proxy and then hit Control+X to exit, and then hit Y to save (instructions are based off of using nano to edit the file).

5. Proxychains is now setup, but how do you use it? Go ahead and VNC into your Server and open a terminal, or open a Terminal inside your Desktop Environment (if using Linux installed on a PC). From there run the command proxychains followed by the application you would like to run, or the path to the application. For example, try running, if you have Firefox installed:

proxychains firefox

Then navigate to an IP checking website, and see if your proxy worked! :)

That concludes the tutorial on how to use a proxy with Oldschool or any browser, on both Linux and Windows. If you have any questions feel free to post in the comments!

Edited by Fluffee
  • Like 6

Share this post


Link to post
Share on other sites
On 2016-03-17 at 7:30 AM, moiz.frost said:

chrome doesnt work

 

On 2016-03-17 at 7:33 AM, moiz.frost said:

Neither does firefox portable

You're right, Chrome is apparently incompatible with WideCap. I haven't tested Firefox portable, but I do know that the regular Firefox works fine with WideCap!

I have updated the original post to reflect this, thanks :)

  • Like 1

Share this post


Link to post
Share on other sites
On 3/17/2016 at 1:19 AM, Aibunker said:

Doesn't this basically just mean people can do this instead of purchasing Vip-E if they just want to use the proxy? :P

Yea, but VIP-E seems tailored towards goldfarmers and if you are running decent size goldfarm, cost of VIP-E is not that much and you are supporting development of TRiBot.

Share this post


Link to post
Share on other sites
Just now, bzq said:

I do not recommend instal widecap, hacked after

The correlation between WideCap and you getting hacked is a coincidence and nothing more, you should however check through your PC as you've obviously picked up something nasty on the net, which you're going to need to deal with.

Share this post


Link to post
Share on other sites

Love the guide, very detailed. I have one problem tho, when I right click the proxy and click "check selected" instead of status field rolling to "ok" It says "connection timed out". I assume there is something wrong with proxy? Please help this is the second proxy I have bought on Virmach both of them are timed out, whenever I try to login Tribot using them proxies I get an error message saying could not connect to specified proxy. Really appreciate some help, thanks

Share this post


Link to post
Share on other sites
36 minutes ago, tadzeus said:

Love the guide, very detailed. I have one problem tho, when I right click the proxy and click "check selected" instead of status field rolling to "ok" It says "connection timed out". I assume there is something wrong with proxy? Please help this is the second proxy I have bought on Virmach both of them are timed out, whenever I try to login Tribot using them proxies I get an error message saying could not connect to specified proxy. Really appreciate some help, thanks

That's probably an issue on VirMach's end, try contacting their customer support!

  • Like 1

Share this post


Link to post
Share on other sites
Just now, ibot4funn said:

Will this guide load the RS client with the same ip as the proxy? I've tried manually entering in the proxy through firefox but it doesnt seem to load the client with the proxy ip. @iFluffee

As far as I know it should, yes

You could always proxify a .jar, like OSBuddy, instead of FIrefox

Share this post


Link to post
Share on other sites

Do you have to actually buy and use a proxy from widecap like it states before downloading? this is what it says when clicking on the link in the tutorial " Download full version you can from here. (4.16 MB) | Don't forget to buy the socks from 5socks.net Servicebefore download the program

is this needed or can i just download it? Or can i use it and download it by using a brwoser running one of my proxies? 

Share this post


Link to post
Share on other sites
Just now, runescapeprodigy said:

Do you have to actually buy and use a proxy from widecap like it states before downloading? this is what it says when clicking on the link in the tutorial " Download full version you can from here. (4.16 MB) | Don't forget to buy the socks from 5socks.net Servicebefore download the program

is this needed or can i just download it? Or can i use it and download it by using a brwoser running one of my proxies? 

You can purchase proxies from any site, they just want you to purchase from them! So no, you don't need to purchase proxies from their site!

Share this post


Link to post
Share on other sites
Just now, runescapeprodigy said:

Alright thanks you so much Fluffee and for oyur other guides! So I can just download it directly from my home Ip and then add the proxies i use just like in your guide right? Just to be 100% clear that i can download it just fine like your guide says. 

Yeah, just follow the guide and you'll be okay :)

Share this post


Link to post
Share on other sites
1 hour ago, runescapeprodigy said:

One last thing, do you know how to check what ipaddress your osbuddy is running on? It doesnt´seem to tell you anywhere now ive checked and set everything up. 

I don't think OSBuddy has an option to show this.
But if you are using a 3rd party program like WideCap to proxy your OSBuddy, the program should let you know.

Share this post


Link to post
Share on other sites

I seem to have an issue when trying to move the 32 bit jar osbuddy into it. 64bit works fine just throwing in the shortcut, but it refuses to take the jar whether i put it in the actual osbuydd folder, its just a shortcut or directly from downloads. What did any of you do to fix that? Am i missing some tricks? 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Content

    • By Failed4life
      Stock: Message for info - Restocks every few days
      Accepted Payment: Crypto Only - Preferably **Coinbase** (Preferred coin is USD Coin, but will accept most)
      Non-Coinbase payments will require confirmations to pass
      I will not go first
      Bulk Incentives available:
      $0.01/m off per 100m starting at 200m
      Max discount reached at 500m = $0.04/m off
      Example: 
      200m = $0.01/m off
      300m = $0.02/m off
      Discord: Failed4life#3370
      Unique ID: 162656616380891136
      Comment your Discord name after adding my Discord!
    • By CrudeCorrosionWatcher
      I'm having difficulties connecting my bots through my proxies.  I've confirmed that the proxies themselves are working by connecting directly through them in my LAN settings on windows, and then visiting WhatsMyIP.  Using the LAN settings method I'm also able to load TRiBot and load a client.  When I try loading Tribot normally without proxies, it loads,and launching clients without proxies works.  If I try launching tribot OR a client with the same proxies I had confirmed working, I get a timeout in the former case and a perpetual "Loading client params" in the latter.
      Has anybody else experienced anything similar and is there something obvious I'm overlooking? Thank you for your input
      tribot_error.txt
    • By Heroinkid
      Hi I got a proxy server from Virmach. I cannot seem to get Tribot to connect to it. I have gotten a 3rd party internet browser called Maxthus to get it to work so I don't think that its the server that's not working. Yes I have VIP-E as well. Please help thanks!

    • By reese33
      looking for site that sells unflagged / no prior use proxies 
       
      preferably cheap
       
      if someone has commented already a site, please comment the one you use/know of (if willing to share)!
       
      thanks, 
      reese
    • By nidus
      For example:  if I bought a single socks5 proxy from https://www.yourprivateproxy.com/, would it be able to proxy say 8 Tribot tabs if they all ran the same script?
    • By schenkelenkel
      Getting this error, client won't start.

    • By Rileyz
      TRiBot is looking to improve a lot of its customer relationship management, customer on boarding process, customer experience, design elements, community engagement and pretty much everything else you can imagine when it comes to marketing.
      Our goal: To ensure that the marketing done TRULY reflects the experience and does not shine an inaccurate light on what TRiBot is lacking in.
      So I ask, what do you love about TRiBot and what do you hate about TRiBot? What does O S Bot, Rune M8, PowR Bot and Dre amBot do better? (yes I purposely didn't spell it right 😂).
      Love, 
      RileyZ
    • By Flax
      Debian 7.0 VPS Setup Guide for TRiBot Botting. 
      By: Flax
       
      Hey guys today I'm going to show you how to setup a VPS for TRiBot botting, I'm making it because I got so many questions from people about this & most VPS guides here are pretty outdated.
      Make sure your VPS operating system is Debian 7 32 or 64bit, or else this guide will not work for you!
      Okay, let's begin.
       
      First off you'll need these programs:
      - PuTTy
      - TightVNC Viewer
      Once you've downloaded those files we can begin setting up your VPS.
       
      Step 1: Open PuTTy and enter your IP and click connect (You should keep the port 22)

       
      Step 2: Now a command prompt will pop up and it'll ask you for a username, Type ' root ' and after that it'll ask you for a password, type in the password that was given to you by your VPS provider.
       
      Step 3: Now you should enter the following commands one-by-one, it can take awhile to install depending on the speed:
      apt-get update apt-get install curl curl https://dl.dropboxusercontent.com/s/jabcbltmn5fuevx/install.sh | sh apt-get install iceweasel Step 4: After that's done you should be able to connect with the VPS through TightVNC.
      REMEMBER: MAKE SURE TO ADD :1 BEHIND THE IP.

       
      This is how it should look:
      Once connected, you can download TRiBot/OSBuddy via the Iceweasel browser(similiar to Firefox).
       
      If you're unable to open TRiBot, try this:
       
      Looking for cheap VPS deals and don't know where to look? Check out Lowendbox, FinalHosting
    • By Proxy-Cheap
      Hello everyone,
      Proxy-cheap.com offers Residential proxies and Windows VPS
      Residential Proxies
      Residential proxies from 50+ countries and 300+ cities to choose from. With our Residential Proxy, you are assured to get the minimum amount of PVs and action blocks. $7 Entry
      10 IPs included
      $70/month Dedicated Unlimited bandwidth Username and Password Up to 1000 Mbit/s Buy Proxies $6 Advanced
      25 IPs included
      $150/month Dedicated Unlimited bandwidth Username and Password Up to 1000 Mbit/s Buy Proxies $5 Enterprise
      50 IPs included
      $250/month Dedicated Unlimited bandwidth Username and Password Up to 1000 Mbit/s Buy Proxies Virtual Private Server (VPS)
      VPS stands for Virtual Private Server, and it’s practically another computer running 24/7 to which you can connect and do things as you would do on your home computer. You can connect to it from anywhere in the world and it continues to run and do it’s job even when you are not connected that is why it is a great idea to have one to run your tools on. $8 Small
      price per month up to 5 accounts Windows Server 2012 R2 80GB SSD Storage 2GB RAM 1 Core vCPU Unmetered Data Transfer 1 Dedicated IP Up to 1000 Mbit/s Order Now $12 Business
      price per month up to 20 accounts Windows Server 2012 R2 160GB SSD Storage 4GB RAM 2 Core vCPU Unmetered Data Transfer 1 Dedicated IP Up to 1000 Mbit/s Order Now $24 Premium
      price per month up to 70 accounts Windows Server 2012 R2 320GB SSD Storage 8GB RAM 3 Core vCPU Unmetered Data Transfer 1 Dedicated IP Up to 1000 Mbit/s
  • Our picks

    • Gradle is a build tool used to accelerate developer productivity.

      We recently setup a Maven repository (TRiBot Central) to make it easier for scripters to create scripts. Check it out here: https://gitlab.com/trilez-software/tribot/tribot-central/-/packages

      Furthermore, we've released a simple Gradle project to make it easy to run TRiBot and develop scripts for it. Check it out here: https://gitlab.com/trilez-software/tribot/tribot-gradle-launcher

      The goals of TRiBot Central are to:

      Deliver updates to TRiBot faster


      Better organize TRiBot's dependencies (AKA dependancies)


      Make it easier to develop scripts for TRiBot


      Make it easier to use and run TRiBot


      Note: TRiBot won't be able to run scripts from within this project until TRiBot's next release.
        • Like
      • 8 replies
    • Hi everyone,

      I'd like to thank everyone for their patience in this transition period. Since last week, we've worked out the remaining bugs with this integration.

      Some users have still been having issues with connecting their forums account to their Auth0 account. To resolve this, we've imported all forums accounts into Auth0.

      Unfortunately, the accounts which were imported today were using an unsupported password hashing algorithm. Hence, random passwords were set during the import.

      What does this mean for me?

      If you've previously linked your forums account to your Auth0 account, you don't have to do anything. Nothing changes for you.


      If you haven't logged in via our new login yet,

      Try logging in with your forums email address and the last password you used


      If you are unable to login, please use the "Forgot password" tool on the login page:
      Follow the instructions to reset your password
       
        • thonking
        • Like
      • 13 replies
    • Hello everyone,

      Last week we tried to roll out Auth0 Login, but we lost that battle. Now it's time to win the war!

      Important changes

      When logging into the client, you'll now have to enter your Auth0 account credentials instead of your forums credentials

      Note: 2FA is still handled through your forums account (for the time being)



      Changes for existing users

      You'll have to link your Auth0 account to your forums account here: https://tribot.org/forums/settings/login/?service=11


      Auth0 accounts have been created for most existing users. Please use your forums email address and password to login.



      Important notes

      Make sure to verify your email address upon creating a new Auth0 account


      When we mention your Auth0 account, we mean your account used for auth.tribot.org as displayed below
      • 81 replies
    • To better support the upcoming changes (TRiBot X, new repository), we're switching our login handler to Auth0. Instead of logging in with the standard form, you'll now be required to login through our Auth0 application.

      All existing accounts which have been used within approximately the past year have been imported into Auth0 using the same email and password combination which has been stored on the forums.

      What does this mean for users?

      Your account credentials are now even more securely stored


      You'll be able to login via Facebook, Google, and others in the future


      Is there anything users have to do differently now?

      Existing users: You'll have to login with the standard login, open your Account Settings, then link your Auth0 account


      New users: You'll be redirected to our Auth0 app (auth.tribot.org) where you'll be able to create an account


      Why was this change made?

      The new apps we are creating (such as the new repository) aren't able to use the forums to handle user logins


      To centralize all user accounts in one area


      To ensure that the client login doesn't go down when the forums are having problems


      To speed up our development


      Other considerations

      There's no documentation or official support for using Invision Community combined with Auth0, so there are still a few kinks we're working out


      We're in the works of creating an account management panel specifically for Auth0 accounts (ETA August)


      It's not possible to change email addresses for the time being (this will be resolved this August)


      Changing passwords is a weird process for the time being. To change your password, you'll have to use the "Don't remember your password" tool on the Auth0 login page
        • Like
      • 11 replies
    • Over the past month, we've been working hard on TRiBot's new repository - a much needed update. This change has been deemed necessary for TRiBot X, and will allow us to really speed up development of all aspects of TRiBot.

      Today we are going to share what we've been working on!


      Now you must be wondering what kind of features the new repository will have.... well, you'll have to be patient for a little while longer. We're still figuring out various technical aspects so we can't provide answers to all possible questions. We're also focusing on development rather than writing about it so that everyone can get access to our latest developments at lightning speed. I will however answer a few users' questions.

      We're planning on a release of this early to mid August, giving users some goodies before TRiBot X's release.

      Thank you all for being patient. I hope everyone is excited as much as I am!
        • Like
      • 17 replies
  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...