Jump to content


Recommended Posts

Welcome to Optimus AIO Combat & Magic Lite Edition!
Note: Because this is the Lite Version of the script, certain features have been disabled. To unlock all features please visit the premium edition thread: 


1. Description

2. Combat Overview

     2.1 What Can the Script Kill
     2.2 Core Combat

     2.3 Looting
     2.4 Banking
     2.5 Progressive Training
     2.6 Worldhopping

3. Magic Overview
     3.1 Regular Spellbook
     3.2 Ancient Spellbook
     3.3 Lunar Spellbook
     3.4 Combo Alching

4. Repository Information

5. Testimonials

6. Gallery

Total Runtime Statistics:


GUI Preview: 

1. Description:
Optimus AIO Combat & Magic
 is a script engineered to safely train up your Combat, Magic and Slayer skills using nearly every training method available in the game.

Using ABC2 technology and thousands of hours of real human playing data, the script now out-performs most human players, while also avoiding bot-detection and staying under the radar from Jagex.

2. Combat Overview:

2.1 What Can the Script Kill?:

The script is capable of killing every monster in the game, below are some noteworthy opponents: 

  • Dragons - Including Green, Blue, Red, Black, Brutal, Adamant& Rune dragons - Amazing for goldfarming or training up your account. 
  • Slayer monsters - Dark Beasts, Cave Krakens, Abyssal Demons, Drakes, Spiritual Mages/Warriors, Wyverns, Nechryaels, Gargoyles, Dust Devils & everything below. It will automatically use the required slayer items for finishing. 
  • Crabs - The script can kill ALL types of crabs: Rock, Sand, Swamp and Ammonite crabs! are all supported. The script will reset the aggressiveness when they stop waking up. 
  • Experiments - Insane XP for pures.
  • Yaks - Insane XP for mains.
  • Chaos druids - Good goldfarming for medium level accounts.
  • All wilderness monsters - Good for farming emblems & wildy slayer. 
  • Dagannoths - Insane XP, I recommend bringing a cannon for maximum gains. 
  • Nightmare Zone Bosses - The script can kill all bosses inside NMZ and drink all the potions. It will end once the dream is complete. 
  • Stronghold of Security and other dungeons - The script supports all of these locations. 
  • Plus 1000's of other monsters - Literally anything you can think of, some people even use it for KBD. 

2.2 Core Combat:

Below are some of the core features that make the script so powerful. Using the features mentioned below the script can perform just as good as any player. 

  • Custom fight areas - You can specify exactly where in the game you want the script to fight. Either with a polygon or a circle. Below is an example of a polygon fight area.fco91rL.gif
  • Dwarf multicannon - The script will place, reload, pickup and stop your cannon decaying.
  • Prayer - The script can use all prayers, including quick prayer, and even recharge your prayer at nearby altars. 
  • Potions - Including Divine, Extended, Super, Regular, Energy, Stamina & NMZ potions. 
  • Special Attacks - Supports every special attack weapon in the game, including weapon switching. 
  • Guthans - The script can switch to Guthan's to heal, then switch back to your primary gear once hp is recovered. 
  • Resetting Aggressiveness - The script can detect when monsters stop being aggressive towards you, and run away to reset the aggro. 
  • Food - It can eat every type of food in the game. Even multiple types of food, simply seperate their names with a comma E.G Lobster, Swordfish.
  • Bones to peaches - The script efficiently uses Bones to peach tablets if you've got them in your inventory. 
  • Safe spotting - Safely train combat from a distance without taking any damage. 
  • Uses slayer items to finish kills - Bags of salt, ice coolers, rock hammer etc. Detects if you've unlocked the slayer ability to auto-kill. 
  • Bone burrying - Train up your prayer!

2.3 Looting:

  • Looting by item name or ID - Simple to setup
  • Looting by item price - E.G Loot all items over 500gp - Fetches prices from the Runescape grand exchange.
  • Telekinetic grab support - For those hard to reach places. 
  • High alching - Turn your loot into gold while you train!
  • Pickup and re-equip ammo - Supports all ammo types.
  • Ironman looting - The script will automatically detect if you're an Ironman, and loot accordingly. 
  • Looting bag & Herb sack  - The script will automatically use them if you're carrying one.
  • Accurate profit calculations  - Track your gains on screen or with your dynamic signature. 

2.4 Banking:

  • Supports every bank in the game - Can use every bank chest / booth / banker in RS.
  • Fully customisable inventory setups.
  • Tip 1: When withdrawing potions or charged jewellery, you can type (*) Instead of the dose number and it will withdraw whatever dose is highest in the bank. 
    For example Ring of duelling(*). 
  • Tip 2: You can also type 0 as the quantity, and it will withdraw-all of the item instead of a specific quantity. 
    For example these settings would make it withdraw all of your cannonballs, then fill your inventory with lobsters.

  • Supports all Teleports - The script can use all teleport methods including Spells, Tabs, Jewelery & Scrolls + more.
  • Will bank for multiple conditions: 
    Hp is below a set %.
    Inventory is full.
    Out of food.
    Out of runes.
    Out of ammo.
    Out of all potions.
    Out of prayer potions.
    Out of antifire potions.
    Out of cannonballs.
    Before a break starts.
    When your slayer task is complete.
  • Heals to full HP at the bank - To save food during your trip, it'll heal up in the bank. 
  • Logs out when you're out of supplies.

2.5 Progressive training: 

The script can do the following when you level up, or after x amount of time:

  • Upgrade equipment - E.g upgrade to Rune scimitar when you reach 40 attack.
  • Change attack styles - E.g switch to Strength training after you reach 40 attack
  • Change training method / location - The script can completely switch training methods, e.g Rock crabs to 60 strength, then go train magic to 70 alching, then switch back to Chaos druids after an hour. All without stopping the script. 

2.6 Worldhopping

The script uses both the ingame worldhopper and login screen worldhopper to find the ideal training spot. Note: All of these settings are optional. 

  • Supports F2P, Members & DMM worlds  - It will automatically detect which you're in, and select worlds accordingly. 
  • Worldhop when x players in your area - The script can count how many players are around and worldhop if it gets too busy. 
  • Worldhop when there's a cannon in your spot - To avoid reduced XP / GP rates.
  • Worldhop when there's a Jagex Moderator nearby - A safety precaution. 
  • Worldhop when the break handler activated - So someone doesn't see you training for prolong periods of time.
  • Worldhop when someone talks in your area.

3. Magic Overview:

The script can train with pretty much every training method available, from Air strike to Ice barrage, it's all supported. 
(The script can also loot, use cannon etc while using non-combat methods).

3.1 Regular Spellbook

The script can use the following regular spellbook spells, both in combat & out of combat.

  • Splashing
  • Strike spells
  • Bolt spells
  • Blast spells
  • Surge spells
  • Enchant jewelry spells
  • Superheat items
  • Enchant crossbow bolt spells
  • Curse spells
  • Alchemy spells
  • Teleport spells

3.2 Ancient Spellbook

The script can use the following ancient spellbook spells.

  • All rush spells
  • All burst spells
  • All blitz spells
  • All barrage spells

3.3 Lunar Spellbook

The script can traing using the following lunar spellbook spells.

  • Humidify
  • Superglass Make
  • Tan Leather
  • Plank Make
  • Spin Flax
  • String Jewelry 

3.4 Combo Alching

The script can also Combo alch, meaning it will cast the high alchemy spell after using another spell to recieve rapid XP.
It can combo alch with the following spells:

  • Combat / Alch - E.G Fire surge & Alch at the same time
  • Curse / Alch - From curse up to stun it's all supported. Earn up to 180K XP/Hour
  • Teleport / Alch - Very fast XP. 

4. Repository Information:

To activate the script on the repository, please use the following links:
https://tribot.org/repository/script/id/3097-optimus-combat-magic/ - Lite Version

https://tribot.org/repository/script/id/651-optimus-combat-magic/ - Premium Version
Note: There is a 10 hour FREE TRIAL for anybody who wants to try out the PREMIUM VERSION of the script on the repository

5. Testimonials:



6. Gallery:

Killing 15,000 abyssal demons and getting over 26 whips on one account.
















Edited by Optimus
Link to post
Share on other sites
  • Replies 61
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Popular Posts

Show me your settings and I'll help you get it running   May make low level potions free in the future   Very nice! Great progress     Just pushed an update   New spell s

16/03/2019 Update: Made optimizations to dwarf mulicannon. Optimized stun alching / magic. Fixed an issue with sand crabs The script is running perfectly. Preview of stun

08/02/2019 Update:

  • Improved pathfinding to the Hill Giants in the brass key dungeon.
  • Script no longer uses Cooking Guild to bank if you don't have the requirements.
  • The script will now pre-heal before starting a fight if appropriate, so you don't waste time eating during combat.
  • Fixed an issue with banking ( Withdrawing a depositing loop ).  
Link to post
Share on other sites


  • The script now caches all required images for the GUI & Paint which means a much faster startup time! Especially for those of you with slower internet connection  (Like myself).

The first time you run the script you will see a progress bar like the one below, the script will then save these images to your .tribot folder and can instantly load them next time you run the script!




Link to post
Share on other sites

Few small updates today:

  • When using "Bank when out of all potions" - The script will now wait until your current boosts have dropped a bit before banking, instead of drinking and leaving straight away.
  • The script will now heal to full hp at the bank using your selected food correctly ^_^.
  • The script now supports Giant seaweed while using "Superglass make".
  • The script now supports the Rune pouch while using the lunar spellbook. 

The script is running Perfectly! Enjoy ^_^ 

Edited by Optimus
Link to post
Share on other sites

Few little bug fixes today:

  • Paint now shows the correct level's you've gain if you start the script boosted by a potion. 
  • Fixed a rare crashing bug that occurred when re-opening the GUI while the script is running.
  • Fixed an issue with equipping weapons and armor if you had special attacks disabled.

The script is running Perfectly!

Link to post
Share on other sites
  • 3 weeks later...
On 2/19/2019 at 8:57 AM, wowzors77 said:

Doesnt seem to work when trying to kill giants in edgeville dungeon and trying to bank big bones. it goes to bank grabs brass key then closes script.

Show me your settings and I'll help you get it running :D 

On 2/20/2019 at 7:14 AM, Osrsplaya said:

Potion support would make this ultimate free script ?

May make low level potions free in the future ^_^ 

On 3/8/2019 at 11:50 AM, trekr said:

Very nice! Great progress :D 


Just pushed an update  

  • New spell supported: String jewellery.
  • Perfected rune pouch support
  • Increased global efficiency of banking. The script will make sure to use appropriate withdraw & deposit options when available.
  • Small bug fixes and improvements to the following spells:
    -Superheat item
    -Spin flax
    -Tan leather
    -Plank make
  • Various other bug fixes that have been mentioned in my discord  
  • New worldhopper - I've coded a custom worldhopper and world selection methods that will always work as the world list changes  
  • Fixed an issue with the paint not showing up, particularly while using the client starter.
  • Fixed an issue tracking herblore xp/level's gained.
  • Fixed an issue with progressive training - It will correctly swap weapons again  

The script is running great!

  • Like 1
  • Thanks 1
Link to post
Share on other sites

12/03/2019 Update:

  • The script will no longer end after worldhopping.
  • The script can now equip shields while progressive training.
  • Fixed a banking bug where it would leave without teleports.

The script is running perfectly ^_^ 

Do you guys have any other feedback? I'd love to hear from you, positive feedback or constructive criticism is always appreciated :D 

I recently just got 90 strength on my pure, only took a week!

Link to post
Share on other sites
23 hours ago, Optimus said:

Show me your settings and I'll help you get it running :D 

May make low level potions free in the future ^_^ 

Very nice! Great progress :D 


Just pushed an update  

  • New spell supported: String jewellery.
  • Perfected rune pouch support
  • Increased global efficiency of banking. The script will make sure to use appropriate withdraw & deposit options when available.
  • Small bug fixes and improvements to the following spells:
    -Superheat item
    -Spin flax
    -Tan leather
    -Plank make
  • Various other bug fixes that have been mentioned in my discord  
  • New worldhopper - I've coded a custom worldhopper and world selection methods that will always work as the world list changes  
  • Fixed an issue with the paint not showing up, particularly while using the client starter.
  • Fixed an issue tracking herblore xp/level's gained.
  • Fixed an issue with progressive training - It will correctly swap weapons again  

The script is running great!

Ranging potion(p2p), Combat potion (p2p), Strength potion(f2p) -  Would be awesome for a free script :P

Link to post
Share on other sites

16/03/2019 Update:

  • Made optimizations to dwarf mulicannon.
  • Optimized stun alching / magic.
  • Fixed an issue with sand crabs

The script is running perfectly.

Preview of stun-alching and cannoning at the same time:


Preview of high alching and cannoning: at the same time:

23 hours ago, justin54 said:

so to use the pre set sandcrabs gui all i have to do is choose sandcrabs in the local monsters refresher and set my safespot to the spot i will stand still on and it will re aggro on its own?

Yes :) 

On 3/12/2019 at 8:39 PM, Osrsplaya said:

Ranging potion(p2p), Combat potion (p2p), Strength potion(f2p) -  Would be awesome for a free script :P

Possible coming soon :) 

  • Like 1
Link to post
Share on other sites
  • 1 month later...
On 3/18/2019 at 5:43 AM, justin54 said:

what settings do i use for green dragons in wildy?

Just add the green dragons as your target and set the tile where you want to train. The rest is up to you ^_^ 

Todays update:

  • Bank when hp is below a set hp % is now working correctly again 
  • The script will now maintain your attack style and auto retaliate settings that you start the script with, this will prevent any unwanted xp gains . ( You can still change attack styles with the training manager, or re-open the gui and change your attack style while the script is running ).
  • The script will remember which npc you were fighting when looting/eating/drinking/using special attack for very smooth combat .
  • The script will now use the escape key instead of clicking the X to close the bank for increased efficiency ( If you've enabled this setting in your hotkeys ).
  • The script will now use the fastest left click option if available while withdrawing / depositing items.
  • Fixed an issue with superglass make  working perfectly now!
  • Fixed an issue with antifire/antiposions.
  • Various bug fixed with banking & equipment. All known bugs are fixed.

The script is running perfectly, enjoy! 

Link to post
Share on other sites
  • 1 month later...

Been a while since I posted here but here are some major new updates the script has recieved:


  • The script now completely supports iron man accounts! It will only attack and loot your own monsters ^_^ 
  • Complete rework of the clicking system, it is now much more accurate
  • Vastly improved navigation methods which now includes the entire Zeah and most new locations.
  • A lot of speed / performance updates which lower cpu usage and increase overall efficiency.
  • Fixed all bugs known, the script is running perfectly ^_^ 
Link to post
Share on other sites
  • 3 weeks later...
  • 3 weeks later...
  • 2 months later...


  • The script now works on ALL versions of Linux!

The script is running great!

On 7/1/2019 at 7:16 AM, voidk5 said:

Looking forward to use the lite version on a new acc, gl me :)


On 7/17/2019 at 5:08 AM, Aaron said:

Does this support KQ & gearing up for KQ?

Hey no it doesn't support kalphite queen, although it supports all of the other kalphite monsters. ^_^ 

Link to post
Share on other sites
  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

    • By rsgoldbar
      Hey! Looking to buy runescape gold safe and quick?
      Then you came to right place!
      Skype - [>Click Here<]
      Discord Server - [>Click Here<]
      FaceBook: [>Click Here<]
      Discord: RSGOLDBAR#9300
      Discord UID:  652287283138920469
      Live Chat - Www.rsgoldbar.com
    • By Naton
      This scripts been on the repo for like a year and a half already but never had a forums thread.
      It might become premium at some point in the future, have not decided.
      Activate it here https://repo.tribot.org/script/id/3387-nprayer/

      Grand exchange support was added earlier today, let me know if you have any issues with it.
    • By Naton
      This is a free application which provides a graphical user interface to launch clients automatically using TRiBot's CLI
      Download: https://github.com/Naton1/Graphical-Client-Starter/releases (download links are under Assets)
      Source: https://github.com/Naton1/Graphical-Client-Starter/
      Loader/Updater: https://github.com/Naton1/Graphical-Client-Starter-Loader/releases (This will automatically download and run the latest version of the graphical client starter when updates are released, so you don't have to update manually)

      The best way to learn about all the features this free & open source software has is to test it out yourself!
      Here's some of the top features:
      Manage an unlimited amount of accounts with various data fields (Login Name/Password/Bank Pin/Client/Script/Script Arguments/World/Break Profile/Heap Size/Use Proxy/Proxy/Proxy IP/Proxy Port/Proxy Username/Proxy Password/Notes)
      Automatically launch TRiBot clients
      View all clients launched through the Graphical Client Starter
      Close all launched clients
      Schedule client start/shutdown
      Import accounts from any format file
      Import accounts from TRiBot's account manager
      Export accounts to TRiBot's account manager
      Export accounts to CSV/TSV/Custom file
      Color the account rows to fit your needs (ex. make rows green/red instead of plain white)
      Built-in proxy manager with proxy checking support (check if your proxies work)
      Customizable set of account columns in the table - fit only the data you need
      Auto-batch accounts into clients with tabs, for example batch 20 accounts into 5 clients with 4 tabs within each client (amount is customizable)
      Ability to only launch accounts that are not currently active
      Custom launch speed - launch all your clients at once, or spread them out over time to not consume too many resources (ex. every 15 seconds)
      Minimize clients on launch
      Restart clients when they close - can be useful if you experience your clients ever crash (make sure to disable this option if you are actually trying to close your clients)
      Looking glass support
      TRiBot sign-in - can log in with your TRiBot credentials through TRiBot's CLI so that you don't have to have previously logged in
      Randomly select f2p/members/custom worlds, optionally preferring low ping worlds (view the worlds section of this thread)
      Blacklist worlds from the random selection
      Cell/Row selection modes - cell selection mode will treat the account table like a spreadsheet
      A ton of utility features to make managing and editing your list of accounts as easy as possible
      Various themes including dark theme
      Saving/Loading profiles
      ... and a ton more! Check it out now for free.
      Setup Application:
      Install TRiBot (if it isn't already installed).
      Download/Install the graphical client starter - you have two choices, use the windows installer (the .exe) (recommended for ease of use), or launch the .jar file. If you are not on windows you must use the jar. The jar file will require java 11+. A quick google of 'download java 11' should give you what you need.
      Configure the path to the location TRiBot was installed in the graphical client starter. This setting can be found at at Settings -> TRiBot Path in the graphical client starter. This must point to a directory named TRiBot. The Graphical Client Starter will try to find this folder automatically on start so it may already be set.
      Starting Clients:
      Click the "Add New Account" button to add new rows to the accounts table.
      Fill out the accounts to launch - Login Name and Script are required. The rest are optional. You can configure more table columns at Settings -> Account Columns.
      Click 'Launch Selected Accounts' to launch your TRiBot clients.
      Account Column Data
      Login Name - Required. This is the login name to log in to the account with.
      Password - The password of the account to log in to. If no password is provided, TRiBot will try to match the login name to an account in the TRiBot account manager.
      Bank Pin - The account bank pin.
      TOTP Code - The authenticator secret key. Note that TRiBot does NOT support this as a CLI arg. This field is only used for importing/exporting.
      Client - The (arbitrary) name of a client that can be used to group multiple accounts together as tabs on the same client. All accounts with the same client name will be grouped together in a single TRiBot client.
      Script - Required. The name of the script to run. This must be exactly as it appears when you go to start a script within TRiBot.
      Script Arguments - The script arguments to pass to the script to run. The contents of this depends on the script. Ask the scripter.
      World - The initial world of the client. See the World section of this thread for more info.
      Break Profile - The name of the break profile to use in TRiBot.
      Heap Size - The heap size for the client. If using tabs/multiple accounts in a single client, the heap sizes for each account will be summed and set as the heap size for the client.
      Use Proxy - If a proxy should be used for the account.
      Proxy - The proxy to use for the account.
      Proxy IP - The proxy IP to use for the account.
      Proxy Port - The proxy port to use for the account.
      Proxy Username - The proxy username to use for the account. 
      Proxy Password - The proxy password to use for the account.
      Notes - Custom notes for your own personal use. Often used to track certain information about certain accounts such as the account status.
      The Graphical Client Starter supports various different themes including multiple dark themes. Find them at Preferences -> Theme.
      The user interface is meant to work specifically on the default theme but everything should work fine on every other theme. If you want a theme other than the default, the recommend themes are JMetro Light/Dark. Note that I did not develop any of the themes myself.
      Examples of JMetro
      Common Issues
      If you are having trouble launching clients (ex. none appear), you can select Preferences -> Debug Mode for a bit more info on the TRiBot launch in the console. The command used for TRiBot's CLI is printed out before launch, use this to determine what is being launched.
      On Windows, you may have to launch the app as an administrator in order to launch a tribot client. (This will happen if you installed tribot to your program files, which is protected)
      You can easily solve this by downloading the windows installer and using that. You can right click an executable file and select "Run as Administrator", or reinstall TRiBot to a non-protected location such as your user directory.
      There are a few ways you can configure proxies. The application will read your proxies from your tribot folder so you can just add them to tribot and they will appear when you open this application. You can also use the built-in proxy manager. Lastly, you can configure the proxy ip/port/user/pass directly in the accounts table by enabling the columns (at settings -> account columns).
      Application Arguments (optional, to launch the app programatically)
      -launchprofile profileName
      Automatically launch a graphical client starter profile
      Doesn't display a GUI if the launchprofile arg is specified

      Ex. java -jar GraphicalClientStarter.jar -launchprofile last -onlylaunch
      World Selection
      Use 0 or -2 for random members world
      Use -1 for random f2p world
      Use -3 for a random members world that has good ping
      Use -4 for a random f2p world that has good ping
      Note that you can add multiple worlds to the world field to randomly choose a world from that list (ex. 315, 316, 316 or 315 316 316)
      Leaving blank defaults to whatever TRiBot does
      There's two ways to configure proxies through the Graphical Client Starter. You can utilize the proxy selection box (proxy column), or use the proxy ip/port/user/pass account columns to edit the fields directly for each account (or a mixture of the two). The proxy selection box is populated with the proxies from the Graphical Client Starter proxy manager (which allows for custom editing of proxies, and also imports proxies from the TRiBot proxy manager). Most users choose to edit the columns directly for each account (Visit Settings -> Account Columns to enable the columns). You need to enable the 'Use Proxy' setting for each account either way.
      Looking Glass
      Go to Preferences -> Looking Glass and enable the option, and provide a path to the LG client you want to use. This will use the TRiBot CLI's built in looking glass support.
      Account Import/Export
      Accounts can be imported/exported in almost any format. Any order of columns can be specified. To import/export, navigate to Tools -> Import/Export and select the specified options. A few simple popup windows will appear going over the necessary steps to configure the file and format. It's highly recommended to take advantage of this - the import/export system is very powerful and customizable.

      Settings are saved to a specific settings file.
      Account Columns: The list of columns that are displayed on the accounts table. Any combination of these can be selected. Note that the fields are not emptied out when de-selecting a column.
      Auto-Batch Accounts: Automatically batch the selected launched accounts into a set of clients with each client having multiple tabs, one for each account
      Launch Inactive Accounts: Only launch accounts whose login name does not exist in an active client (accounts will be skipped, and not launched, if they exist in an active client). This setting will be checked when launching any client and if that setting is active and there is a corresponding client for the account, the launch will be skipped.
      Launch Speed: The time between each client launch. Sometimes launching too many clients at once can cause issues with the clients that are launched due to too many resources being used at once so spreading them out of some period of seconds can help.
      Minimize Clients: Minimize the clients after they are launched (using the CLI flag)
      Restart Closed Clients: Any client (that is currently listed in Active Clients) that is closed will automatically be restarted. Make sure to disable this when you actually want to close your clients.
      Schedule Launch: Delay launching your clients until a specific time. Your accounts will sit in the Launch Queue until the specified time, then launch.
      Schedule Shutdown: Shutdown your clients at a specific time. Also, optionally restart the shutdown clients after some period of time. By default, the schedule shutdown setting is only applied to clients that are launched after configuring the settings, but an option is provided to apply them to all active clients as well (ex. you already have 10 clients active and want to shut them down at a specific time).
      Looking Glass: Support for TRiBot's Looking Glass (using the CLI flags)
      TRiBot Path: The path to where TRiBot was installed. The Graphical Client Starter will try to automatically find this for you so you probably won't have to set this yourself.
      TRiBot Sign-In: Sign in to TRiBot automatically through the supported CLI flags, incase your locally saved SID is expired. Sometimes you will be automatically signed out of TRiBot so you may want to provide your sign-in information so you don't have any issues launching when you have been signed out.
      Worlds -> Blacklist: Prevent certain worlds from being selected when choosing a random world
      Import -> Import Action: How to import the accounts into the current settings file (add new accounts or try to merge with existing)
      Preferences are saved globally, regardless of what your current settings file is.
      Debug Mode: Provides more debug in the console for launched clients. Only use this if trying to debug something - otherwise it can cause clients to use more resources.
      Selection Mode: Row/Cell selection modes are supported, row selection mode means you select a row at a time in the accounts table, cell selection means you can select a cell at a time, kind of like a spreadsheet.
      Show TRiBot Imports: Shows suggestions from the data that currently exists in TRiBot when filling out some fields in the accounts table, for example may display all Login Names in the TRiBot account manager.
      Theme: Configure a different display. The recommended theme is the default, but JMetro Light/JMetro Dark/Dark/Modena Dark are popular as well. Note that some themes may have minor graphical issues (I did not create any of them). Everything is written to work/display properly on the default theme.
      Try Preferences -> Selection Mode ->  Cell Selection Mode. This will make the table selection similar to how Excel/Google Sheets work. You can do cool things which save time like the following (this uses copy pasting):
      You can right-click the column headers to bulk configure values for the selected rows (including the selection column header itself)
      Launch Inactive Accounts (under Settings) can make sure you don't double-launch any clients (launches all selected accounts where there isn't a corresponding active client with the same username)
      Take the time to become familiar with the settings and features of this application. You will thank yourself later when you save yourself a lot of time.
      Ctrl+Drag to highlight multiple rows at once in row selection mode, then right click -> select rows to easily bulk select rows 
      All leading and trailing whitespace is trimmed on client launch incase you have an accidental whitespace character that you didn't realize
      Please notify me of any issues.
    • By Naton
      This only works with nScripts. See below to view a list of supported nScripts.
      This bot will stay logged out until a connected bot communicates that it is ready to trade, then it will log in and wait for the bot the trade. It will offer and receive items from the connected bots.
      Repository Link
      Move your account to the place you want to mule (or have a mule tile in advanced preferences and the script will travel there)
      Select an ID (1-99, the purpose of this is to provide an identifier to this mule so you can connect other accounts to it, along with your IP)
      If offering items to other bots, have those items in your inventory already
      More detailed instructions on connecting other bots
      Nothing, other than the supplies you want to offer
      Communicates to your bots without logging in
      Trade items to and from your bots automatically (depending on what the connected script does)
      Depositing muled items
      Send discord webhook on trade
      Multiple mules per machine (up to 50)
      Many customizable preferences

      Progress Reports
      Bug Reports
      For the sake of both of our time, please attempt to solve issues on your own first to verify that the issue is not on your end (for example, misconfigured settings).
      If you are unable to resolve the issue on your own, please reach out to me for assistance. You can obtain assistance through the forums thread, the TRiBot forums private messaging system, or in my support discord.
      At the minimum, please provide the debug when reporting an issue. You can obtain the debug by following right clicking the Client Debug/Bot Debug tabs and clicking Copy to Clipboard. You can then paste this to pastebin and give me the link. This will help me to figure out what exactly is happening.
      Follow this gif for assistance with obtaining the debug. https://i.imgur.com/JruOAaz.gif
      The more information you can provide, the faster the issue is likely to be resolved. A description of the issue (ex. what is happening vs what you think should be happening) is helpful. A gif of the issue is very helpful, but if you can't get that then a screenshot is better than nothing. The debug, as mentioned above, should be provided.
      Advanced Preferences
      This script contains a plethora of advanced customization. These settings are primarily targeted at more advanced users. It's not recommend to mess around with them until you have some experience with the script. You can hover your mouse over many of the advanced preferences for more information. If there is a specific setting you would like a description of, reach out to me and I'll add a tooltip/improve the existing tooltip to better help you.
      Script Arguments
      All of my scripts support script arguments in the form
      settings:name where name is the name of the settings file to load. You can use the special name `last` to load your last settings.
      Port Forwarding
      You will need to port forward (open a port) to connect bots on other machines to your machine, if using multiple machines. This is usually specific to your router. I do not have a direct guide to port forwarding, this is not specific to my script. You can find a ton of information on google, or you could try messaging someone who has this already setup. I have not port forwarded in a long time so I can't help much here. Remember you need to forward port number 45000 + mule ID. Use this website to check open ports https://www.yougetsignal.com/tools/open-ports/. You can also test your mule connection in GUI of my scripts that support muling.
      Supported nScripts
      Note that each script has specific things that are supported, such as muling off excess gold while restocking, cashing in gold on start, customizable muling (nRestocker), and more. It really depends on the script. See the corresponding script thread for what that integration looks like, or ask me if you can't find it and I'll update the thread.
      nBlast Furnace
      nSmither (Cannonballs only)
      nBlast Mine
      nCrab Killer
      nNightmare Zone (only for the mule connection to appear in the mule control panel)
      nCrab Killer (only for the mule connection to appear in the mule control panel)
      nGreen Dragon Killer
      nOrb Charger
    • By rs06botHein
      (Click Activate to add script)
      Handles all rooftop courses with ease!
      Script features:
      Simple User Interface using JavaFX Food support Stamina potion support Worldhopping support Stopping level support Mark of Grace support Web Walking (start script anywhere) Uses Asynchronous Camera Arguments support   Breaking support Disables auto retaliate & zooms out camera ABCL10 + reaction sleep modifier Simple saving & loading profiles Automatically loads last setting profile on GUI Several failsafe's: Seers course: Climbing up ladder Movement failsafe (When character does not move for 3 minutes and is not banking the script will automatically stop) Supported Courses:
      Gnome Stronghold Course (lvl 1 Agility) Draynor Rooftop Course (lvl 10 Agility) Al Kharid Rooftop Course (lvl 20 Agility) Varrock Rooftop Course (lvl 30 Agility) Canifis Rooftop Course (lvl 40 Agility) Falador Rooftop Course (lvl 50 Agility) Seers Rooftop Course (lvl 60 Agility) Pollnivneach Rooftop Course (lvl 70 Agility) Rellekka Rooftop Course (lvl 80 Agility) Ardougne Rooftop Course (lvl 90 Agility) Script Instructions:
      You can start the script anywhere as long as your player is on the ground floor level or in the selected course itself.
      GUI: Arguments:  1-99 Progression [PM]:  Progress reports:
      Features to be added:
       Change GUI to adjust progressive mode Get Script here: https://repo.tribot.org/script/id/3738-xrooftop-agility/
    • By bbuu20
      bProgressive-Miner (Open Source)
      bProgressive-Miner is a task-based mining script that should work anywhere on any rock in the game.
      This script features the following:
      Progressive Tasks
      World Hopping
      Full Inventory Actions (Banking/Powermining/End-Script)
      Pickaxe Upgrading
      Saving/Loading of User Profiles
      Level 10 ABC2 Implementation
      JavaFX GUI
      JDK 15
      And more...
      Source Code: https://github.com/zebediahperkins/bProgressive-Miner
      Download: https://repo.tribot.org/script/id/3417-bprogressive-miner/
      How to use args
    • By Naton
      nAccount Dispatcher allows you to configure a list of accounts that will be dispatched across to multiple clients. nScripts support connecting to this, most notably nRestocker, to pull accounts. This can override the account selected in the tribot account manager.
      Repository Link
      Fill out an account list, and click start
      All nScripts can pull an account on start with the arg 'dispatch' (ex. settings:last,dispatch). By default it will use the account dispatcher id/ip in the settings file. To override this, provide the args dispatcherId:id,dispatcherIp:ip (ex. settings:last,dispatch,dispatcherId:1,dispatcherIp:
      nRestocker can connect to the account dispatcher to pull an account, complete a task list/tree, reset, grab another account, and repeat until out of accounts.

      See nRestocker 
      Note that you can right click the table to take actions
      Setup is similar to nMule (if you want to connect to other machines you have to port forward, port will be 45100 + id)
    • By Failed4life
      Stock: Message for info - Restocks every few days
      Accepted Payment: Crypto Only
      Preferred cryptos: USDC, BTC, ETH
      Non-Coinbase payments will require confirmations to pass
      I will not go first
      Current Price:
      Discord: Failed4life#3370
      Unique ID: 162656616380891136
      Comment your Discord name after adding my Discord!
    • By dramas
      Welcome to my 07 Gold Shop.

          *Stake Trading Available!
      *Using high Lvl accounts!
      **Can do in increments or use a MM at your expense.
          ⭐Payment Methods:⭐

      (Instant payments via CoinBase/Localbtc available!)

      ⭐Current Rate:⭐
      0,48-0.52$/m (price range)  
      ==>PM for prices.

      ⭐Contact me:⭐
      Discord: Drama#8744 (COPY-PASTE)
      (My unique ID: 240960592494460929)
    • By Obble
      Use code TRIBOT for 50% OFF bringing our VPS to $5 AUD per GB (~$3.75 USD)
      All prices on site are in AUD
      Visit our VPS page here
      About Obble Hosting
      We are an Australian business established in 2018 offering discounted Australian webhosting. We've just launched our new SSD VPS range and providing 50% discount to regular pricing, valid for lifetime of the account. Obble Hosting strives for the best level of customer support while retaining affordable pricing - See our reviews online (Google/Facebook/Trustpilot).
      $10 AUD / Month After Discount ($7.50 USD)
      - 2GB RAM (Approx 2-3 Bots minimum)
      - 1 CPU @ 3.9ghz
      - 35 SSD NVMe Storage
      - Dedicated IP Included
      - Instant Setup
      - Unlimited Bandwidth
      $20 AUD / Month After Discount ($15 USD)
      - 4GB RAM (Approx 4-6 Bots minimum)
      - 2 CPU @ 3.9ghz
      - 70 SSD NVMe Storage
      - Dedicated IP Included
      - Instant Setup
      - Unlimited Bandwidth
      $40 AUD / Month After Discount ($30 USD)
      - 8GB RAM (Approx 8-12 Bots minimum)
      - 3 CPU @ 3.9ghz
      - 140 SSD NVMe Storage
      - Dedicated IP Included
      - Instant Setup
      - Unlimited Bandwidth
  • Our picks

    • What to expect from TRiBot moving forward.
      • 10 replies
    • TRiBot 12 Release Candidate

      The TRiBot team has been hard at work creating the last major version of TRiBot before the TRiBot X release. We've noticed many problems with TRiBot 11 with a lot of users preferring TRiBot 10 over 11. We've heard you, so we took TRiBot 10, added the new features introduced with 11, introduced some other new things, and created TRiBot 12. So without further adieu, here's TRiBot 12.
      • 39 replies
    • Gradle is a build tool used to accelerate developer productivity.

      We recently setup a Maven repository (TRiBot Central) to make it easier for scripters to create scripts. Check it out here: https://gitlab.com/trilez-software/tribot/tribot-central/-/packages

      Furthermore, we've released a simple Gradle project to make it easy to run TRiBot and develop scripts for it. Check it out here: https://gitlab.com/trilez-software/tribot/tribot-gradle-launcher

      The goals of TRiBot Central are to:

      Deliver updates to TRiBot faster

      Better organize TRiBot's dependencies (AKA dependancies)

      Make it easier to develop scripts for TRiBot

      Make it easier to use and run TRiBot

      Note: TRiBot won't be able to run scripts from within this project until TRiBot's next release.
      • 13 replies
    • Hi everyone,

      I'd like to thank everyone for their patience in this transition period. Since last week, we've worked out the remaining bugs with this integration.

      Some users have still been having issues with connecting their forums account to their Auth0 account. To resolve this, we've imported all forums accounts into Auth0.

      Unfortunately, the accounts which were imported today were using an unsupported password hashing algorithm. Hence, random passwords were set during the import.

      What does this mean for me?

      If you've previously linked your forums account to your Auth0 account, you don't have to do anything. Nothing changes for you.

      If you haven't logged in via our new login yet,

      Try logging in with your forums email address and the last password you used

      If you are unable to login, please use the "Forgot password" tool on the login page:
      Follow the instructions to reset your password
      • 17 replies
    • Hello everyone,

      Last week we tried to roll out Auth0 Login, but we lost that battle. Now it's time to win the war!

      Important changes

      When logging into the client, you'll now have to enter your Auth0 account credentials instead of your forums credentials

      Note: 2FA is still handled through your forums account (for the time being)

      Changes for existing users

      You'll have to link your Auth0 account to your forums account here: https://tribot.org/forums/settings/login/?service=11

      Auth0 accounts have been created for most existing users. Please use your forums email address and password to login.

      Important notes

      Make sure to verify your email address upon creating a new Auth0 account

      When we mention your Auth0 account, we mean your account used for auth.tribot.org as displayed below
      • 81 replies
  • Recently Browsing   0 members

    No registered users viewing this page.

  • Create New...